Inserts & Pins
Shop By
Now Shopping by
Shopping Options
- Product Types Guide Roller Pins Remove This Item
- Product Types Bushes Remove This Item
- Product Types Top Hats Remove This Item
- Product Types Washers & Sleeves Remove This Item
- Product Types Pins Remove This Item
-
ACLA Nylon Top Hat Inserts Part Number: 10199Dimensions:22mm OD x 11mm Wide (Each) x 10mm ID£9.50 -
-
ACLA M10 Guide Roller Tapped Insert Part Number: 10201Dimensions:33mm Long with M10 tapped centre
Suits 2 x 6002ZZ Bearings£12.00 -
-
ACLA M12 Tapped Guide Roller Tapped Insert Part Number: 10203Dimensions:57mm Long x 35mm OD£15.00 -
-
ACLA M12 Guide Roller Tapped Insert Part Number: 10205Dimensions:47mm Long x 35mm OD with M12 Tapped Hole
£15.00 -
ACLA Concentric Pin & Top Hat Part Number: 10206Dimensions:Pin: 56mm Long x 30mm OD with M8 Thread
Top Hat: 22.5mm Long x 30mm OD x 8mm ID
£16.00 -
-
-
KONE, MARRYAT & SCOTT 2 Top Hats (1 Plain, 1 Threaded) and M8 Bolt Part Number: 11108Dimensions:50mm Long x 22mm OD x M8 ID£8.00 -
HAMMOND & CHAMPNESS Top Hat Insert Part Number: 11226Dimensions:22mm OD x 14mm Wide x 10mm ID£12.50 -
DUPAR / DEWHURST, HAMMOND & CHAMPNESS, PROPBROOK M10 Concentric Pin Part Number: 11227Dimensions:M10 Thread x 17mm OD£9.00 -
DUPAR / DEWHURST, HAMMOND & CHAMPNESS, PROPBROOK M10 Eccentric Pin Part Number: 11228Dimensions:M10 Thread x 17mm OD£12.50 -
HAMMOND & CHAMPNESS M12 Eccentric Pin Part Number: 11230Dimensions:35mm Total Length x M12 x 10mm Long Thread£9.50 -
DOVER, HAMMOND & CHAMPNESS Pick Up Roller Shaft Part Number: 11298Dimensions:68mm Long x 12.5mm OD to suit 9.5mm ID Rollers£9.50 -
HAMMOND & CHAMPNESS Dover 4 Piece Nylon Bush Set - DC-68 Part Number: 11308Dimensions:Larger Bush - 15.8mm (1/16") OD x 12.7mm (1/2") ID
Smaller Bush - 7.9mm (1/32") OD x 6.35mm (1/4") ID£7.50 -
DOVER, HAMMOND & CHAMPNESS 2 Piece Nylon Bush Set Part Number: 11309Dimensions:22mm OD x 6mm Wide x 12.7mm ID£5.00 -
DOVER, HAMMOND & CHAMPNESS 2 Piece Nylon Bush Set Part Number: 11310Dimensions:11mm OD x 4mm Wide x 6.5mm ID£5.00 -
-
-
-
-
-
EXPRESS Axle Pin for Limit Roller Part Number: 16109Dimensions:49mm Long x 9.5mm OD with 2 x 2.5mm Holes£12.50 -
-
DUPAR / DEWHURST M8 Eccentric Pin Part Number: 17706Dimensions:55mm Long x 8mm OD with M8 x 12mm Thread
£15.00 -
DUPAR / DEWHURST M10 Concentric Pin in Stainless Steel Part Number: 17708Dimensions:39mm Long x M10 Thread£14.00 -
DUPAR / DEWHURST M8 Threaded Pin, Nuts & Washers Part Number: 17710Dimensions:30mm Thread x M8£13.00 -
-
THYSSEN M6 Pick Up Roller Shaft Part Number: 19204Dimensions:40mm Long with M6 x 22mm Thread£20.00 -
-
-
-
OTIS M12 Concentric Pin Part Number: 20236Dimensions:Overall: 20mm OD x 42mm Long Thread: M12 x 20mm Long£9.00 -
OTIS M12 Eccentric Pin Part Number: 20237Dimensions:Overall: 20mm OD x 42mm Long Thread: M12 x 20mm Long£13.50 -
-
-
OTIS M12 Concentric Pin (Short Thread) Part Number: 20336Dimensions:35mm Long (Overall) x M12 x 13mm Long Thread£9.00 -
OTIS M12 Eccentric Pin (Short Thread) Part Number: 20337Dimensions:35mm Long (Overall) x M12 x 13mm Long Thread£10.00 -
-
-
-
FURSE Steel Top Hat (Pair) to Reduce Centre to 9mm Part Number: 22127Dimensions:25mm OD x 9mm ID£12.00 -
-
WADSWORTH M12 Concentric Pin & Spacer Washer Part Number: 22452Dimensions:33mm Long with M12 x 7.5mm Thread£8.50 -
WADSWORTH Steel Concentric Pin with Half Nut Part Number: 22453Dimensions:39mm Total Length. 5/8" (15.875mm) x 13mm Thread£8.75 -
WADSWORTH Steel Concentric Pin with Half Nut Part Number: 22454Dimensions:46.5mm Long with 1/2" (12.7mm) x 14mm Thread£15.00 -
WADSWORTH Steel Spacer Washer/Sleeve Part Number: 22455Dimensions:22mm OD x 8mm Wide x 16mm ID£1.50 -
WADSWORTH Steel Spacer Washer/Sleeve Part Number: 22456Dimensions:7/8" (22.225mm) OD x 1/4" (6.350mm) Wide x 5/8" (15.875mm) ID£1.50
Loading ...
Load More ...