Manufacturer
Shop By
Now Shopping by
Shopping Options
- Width 61-70 Remove This Item
- Width 51-60 Remove This Item
- Width 41-50 Remove This Item
- Width 11-15 Remove This Item
- ACLA 140mm Long Vulkollan® Curved Cell Pre-Liner Part Number: 10109Dimensions:140mm Long x 55mm Wide x 37mm Deep£22.00
- ACLA 140mm Long Half Aluminium Guide Shoe Part Number: 10112Dimensions:140mm Long x 70mm Wide x 40mm Deep£18.00
- ACLA Nylon Top Hat Inserts Part Number: 10199Dimensions:22mm OD x 11mm Wide (Each) x 10mm ID£9.50
- MACLA 120mm Long Nylon Guide Shoe Part Number: 10939Dimensions:120mm Long x 68.5mm Wide x 40mm Hole with 2 x 12mm Fixing Holes
Hole centres - 90mm£42.00 - ACLA 80mm Long Polyurethane Guide Shoe Liner to Suit 5mm Guide Rail Part Number: 10944Dimensions:80mm Long x 60mm Wide x 26mm Deep with 6.5mm Holes at 40mm Centres£15.00
- ACLA, HUSBANDS 60mm Long Polyurethane Guide Shoe Liner to Suit 5mm Guide Rail Part Number: 10952Dimensions:60mm Long x 50mm Wide x 30mm Deep with 6.5mm Holes at 30mm Centres£13.00
- KONE Kone Electronic Shaft Switch Oscillator Part Number: 10982Dimensions:
100mm Long x 67mm Wide x 22mm Deep
£55.00 -
- KONE 140mm Long Guide Shoe with Liner to Suit 16mm Rail Part Number: 11009Dimensions:
140mm Long x 50.5mm Wide x 120mm Deep x 16mm Rail
£120.00 - KONE Lock Arm & Roller (Right Hand) Part Number: 11015Dimensions:Bracket: 124mm Long x 53mm Wide
Roller: 31.5mm OD x 16.5mm Wide
£18.00 - KONE Lock Arm & Roller (Left Hand) Part Number: 11016Dimensions:Bracket: 124mm Long x 53mm Wide
Roller: 31.5mm OD x 16.5mm Wide
£18.00 - KONE Steel Roller with Polyurethane Tyre on Bracket with M8 Tapped Hole (Curved Track) Part Number: 11035Dimensions:60mm OD x 13mm Wide with M8 Tapped Hole£40.00
- KONE Steel Roller with Polyurethane Tyre on a Bracket with M8 Tapped Insert (Curved Track) Part Number: 11036Dimensions:60mm OD x 13mm Wide with M8 Tapped Insert£40.00
- KONE, SELCOM Fineline Hanger/Kicking Roller (Flat Track) Part Number: 11037Dimensions:
44mm OD x 13mm Wide x 15mm ID
£19.50 - KONE Nylon Gib (AMD) Part Number: 11043Dimensions:30mm Long x 12.5mm Wide (When Assembled) x 14mm Deep£5.00
-
- KONE 127mm Long Steel Guide Shoe Part Number: 11048Dimensions:127mm High x 63mm Wide x 100mm Deep£120.00
- KONE 210mm Polyethylene Guide Shoe to Suit 16mm Rail Part Number: 11052Dimensions:
210mm Long x 48mm Wide x 39mm Deep to suit 16mm Guide Rail
£95.00 - KONE Guide Rail Lubricator Bracket Part Number: 11073Dimensions:92mm Long x 70.5mm Wide x 48mm Deep£18.50
- KONE Left Linkage Arm for Unlocking Device Part Number: 11074Dimensions:126mm Long x 66mm Wide x 30mm Deep£40.00
-
-
- KONE ADL Stainless Steel Door Shoe with Nylon Gib Part Number: 11085Dimensions:63mm Long (72mm Long with Gib) x 12.5mm Wide x 54.5mm Thick with 25.5mm Hole Centres£9.60
- KONE Toothed Belt Pulley on Bracket Part Number: 11092Dimensions:Bracket - 80mm Long x 43mm Wide x 42mm Deep
16mm Fixing Slot Centres - 60mm
Roller - 39mm OD x 20mm Wide£32.00 - KONE Toothed Belt Pulley on Bracket Suit ADV Eline Monospace Part Number: 11094Dimensions:Bracket - 80mm Long x 60mm Wide x 42mm Deep
20mm Fixing Slot Centres - 50mm x 15mm
Roller - 43mm OD x 35mm£36.00 - KONE Stainless Steel Door Shoe with Gib Part Number: 11099Dimensions:68mm Long x 12mm Wide x 56mm Deep£9.00
-
- KONE Nylon Door Lock Roller Part Number: 11111Dimensions:32mm OD x 14mm Wide x 12mm ID
Shoulder - 20mm OD x 3mm Deep£8.50 -
- KONE ADT Nylon Upthrust Roller with M10 Eccentric Pin Part Number: 11121Dimensions:39mm OD x 14mm Wide with M10 Eccentric Pin£22.00
- KONE AMD/ADV Roller with M8 Tapped Insert (Curved Track) Part Number: 11122Dimensions:50mm OD x 14mm Wide with M8 Tapped Insert£19.00
- KONE Nylon Counter Roller for Hanger AMD/ADV/Isola with M8 Tapped Insert (Curved Track) Part Number: 11123Dimensions:44mm OD to 41mm OD x 12mm Wide (18.5mm Wide including insert) with M8 Tapped Insert£20.00
- KONE Nylon Landing & Car Door Roller & Bracket - ADX2 Slow Panel with M8 Tapped Insert (Curved Track) Part Number: 11124Dimensions:60mm OD x 13mm Wide with M8 Tapped Insert£29.50
- KONE Landing & Car Door Roller with Bracket with M8 Tapped Insert Part Number: 11135Dimensions:60mm OD x 13mm Wide with M8 Tapped Insert£29.50
- KONE Stainless Steel Door Shoe with Nylon Gib for AMD Part Number: 11137Dimensions:56mm Long x 12mm Wide x 85mm Deep£14.00
- KONE Stainless Steel Door Shoe with Nylon Gib (OAK45) Part Number: 11138Dimensions:63mm Long (72mm Long Gib) x 12mm Wide x 42.5mm Deep with 50mm Hole Centres£8.70
- KONE Nylon Roller (ADC/ADZ) with M10 Concentric Pin Part Number: 11139Dimensions:Wheel - 40mm OD x 11.5mm Wide
Pin - 5mm Shoulder with 13mm x M10
£28.00 - KONE Nylon Door Gib to suit ADC & Monospace Door Shoe Part Number: 11140Dimensions:68mm Long x 12mm Wide x 15mm Deep£6.50
- KONE Nylon Door Gib (ADX-2) Part Number: 11141Dimensions:30mm Long x 12.5mm Wide x 12.5mm Deep£8.00
-
- KONE Stainless Steel Door Shoe with 2 Nylon Gibs (ADX2) Part Number: 11145Dimensions:386mm Long x 45mm Wide x 2.5mm Thick£28.50
- KONE 140mm Long Polyethylene Guide Shoe Liner to Suit 29mm Guide Rail Part Number: 11151Dimensions:140mm Long x 43.5mm Wide x 30mm Deep£40.00
- KONE 80mm Long Nylon Fixed Guide Shoe Liner to Suit 6mm Guide Rail Part Number: 11152Dimensions:80mm Long x 15mm Wide x 25mm Deep£24.00
- KONE 80mm Nylon Long Fixed Guide Shoe Liner to Suit 9mm Guide Rail Part Number: 11153Dimensions:80mm Long x 15mm Wide x 25mm Deep£24.00
- KONE Nylon Roller on Bracket ADX2 Slow Panel (Curved Track) Part Number: 11164Dimensions:60mm OD x 13mm Wide x 8mm Plain Hole£26.50
- KONE Stainless Steel Door Shoe with Nylon Gib for ADV & ADT (Straight) Part Number: 11167Dimensions:56mm Long x 12mm Wide x 87.5mm Deep£11.50
- KONE Stainless Steel Door Shoe with Nylon Gib Part Number: 11168Dimensions:
70mm Long (72mm with Gib) x 14.75mm Wide (Gib 12mm Wide) x 62mm Deep
Top Hole Centres - 52mm
Bottom Hole Centres - 32mm
£9.50 -
- KONE Steel Door Shoe with Nylon Gib Part Number: 11171Dimensions:30mm Long x 12mm x 56mm Deep£9.20
- KONE Nylon Door Hanger Roller with M8 Tapped Insert (Curved Track) Part Number: 11176Dimensions:56mm OD x 14mm Wide with M8 Tapped Insert£40.00
Loading ...
Load More ...



































































































































































































































