Manufacturer
Shop By
Now Shopping by
Shopping Options
- Product Types Bridges & Shunts Remove This Item
- Product Types Assemblies Remove This Item
- Product Types Other Roller Remove This Item
- KONE Shunt for AMD Part Number: 11091Dimensions:40mm Long x 30mm Wide x 12mm Deep with 28mm Hole Centres£8.50
- KONE, SCHINDLER, SCHMERSAL, STEUTE Door Shunt for Sliding Door (AMD-2006) Part Number: 11100Dimensions:40mm Long x 40mm Wide£8.25
-
-
- KONE Door Hanger Assembly Part Number: 11128Dimensions:
146mm Long x 140mm Wide x 31.5mm Deep with Hanger Roller 74mm OD
£85.00 - KONE Door Hanger Assembly Part Number: 11130Dimensions:
190mm Long x 140mm Wide x 31.5mm Deep with Hanger Roller 74mm OD x 18.5mm Wide
£59.60 - KONE Retractable Roller Part Number: 11132Dimensions:50mm OD x 20mm Wide x 1/2" ID (12.7mm)£19.50
-
- KRONENBERG, ORONA Door Bridge Part Number: 11727Dimensions:
30mm Long x 27mm Wide x 11.5mm Deep
£15.00 - CAN-LIFT Plug Contact Bridge Part Number: 11901Dimensions:
34mm Long x 56mm Wide x 33mm Deep with 28mm Contact Centres
£32.00 - GAL Heavy Duty Sheave Assembly *SPECIAL ORDER* Part Number: 12971Dimensions:
129mm Long x 139mm Wide x 31mm Deep
£140.00 - GAL Sheave Assembly (Right Hand) Part Number: 12977Dimensions:140mm High x 135mm Wide x 32mm Deep£80.00
- GAL Sheave Assembly (Left Hand) Part Number: 12978Dimensions:140mm High x 135mm Wide x 32mm Deep£80.00
- GAL Sheave Assembly (Left Hand) Part Number: 13004Dimensions:135mm Long x 32mm Wide x 170mm Deep£95.00
- GAL Sheave Assembly (Right Hand) Part Number: 13005Dimensions:135mm Long x 32mm Wide x 170mm Deep£95.00
- GAL Car Gate Roller with M6 Threaded Insert Part Number: 13018Dimensions:32mm OD x 12.5mm Wide with M6 x 25mm Threaded Insert£8.50
-
- EXPRESS Limit Roller with Rubber Tyre Part Number: 16108Dimensions:
69mm OD x 20mm Wide x 9.5mm ID
£45.00 -
-
- ALJO Contact Bridge Part Number: 18188Dimensions:58mm Long x 9mm Wide x 17mm Contact Centres£10.50
- ALJO Landing Release Roller with M8 Thread Part Number: 18205Dimensions:28mm OD x 20mm Wide with M8 x 32mm Long Stem£30.00
- FERMATOR Robusta Hanger Roller Assembly (Fast Panel) Part Number: 18832Dimensions:160mm High x 135mm Wide x 31mm Deep£140.00
- FERMATOR Robusta Hanger Roller Assembly (Slow Panel) Part Number: 18833Dimensions:170mm High x 135mm Wide x 31mm Deep£140.00
-
- FERMATOR Shunt for EDC (92 Contact) Part Number: 18951Dimensions:40mm Long x 30mm Wide x 9mm Deep£14.00
-
- FERMATOR Door Closer Roller on Shaft Part Number: 19041Dimensions:Shaft - 41mm Long x 9mm OD (Smallest) x 12.5mm OD (Largest) Roller - 30mm OD x 12mm Wide x 9mm ID£16.00
-
- ALJO, FERMATOR Contact Bridge Part Number: 19076Dimensions:
60mm Long x 16mm Wide x 24mm Deep
£14.00 -
-
- OTIS Steady Roller Part Number: 20213Dimensions:41mm OD x 30mm Wide x 10mm ID
Recessed on one side - 28mm Diameter x 10mm Deep£20.00 -
- OTIS Steel Roller with M12 Bolt Part Number: 20340Dimensions:59mm OD x 14mm Wide with M12 Concentric Pin£35.00
- OTIS Lock Shunt (27mm Long) Part Number: 20361Dimensions:44mm Long x 20mm Wide x 32mm Total Height with 27mm Long x 15mm Centre Contact Arms£40.00
- OTIS Lock Shunt (17mm Long) Part Number: 20362Dimensions:44mm Long x 20mm Wide x 7mm Thick with 17mm Long x 15mm Center Contact Arms£40.00
- OTIS Concentric Steel Door Roller with 4.5mm Shoulder Part Number: 20864Dimensions:30mm OD x 9mm Wide x 8mm ID£16.00
- IGV, PRISMA, SELCOM Bridge for Door Contact (K83) (18mm High) Part Number: 32900Dimensions:
41mm Long x 12mm Wide
14mm Between Pins x 18mm High£4.50 - IGV Recovery Roller Part Number: 32948Dimensions:
28mm OD x 15mm Wide with M10 Shaft (15mm Long + 3mm Shoulder)
£16.50 - IGV Lower Roller (Fast Door) Part Number: 33004Dimensions:48mm OD x 12mm Wide with M8 Tapped Insert£20.00
- IGV Lower Roller (Slow Door) Part Number: 33005Dimensions:38mm OD x 13mm Wide with M8 Eccentric Pin£22.00
- IGV Roller with M8 Eccentric Pin Part Number: 33012Dimensions:28mm OD x 10mm Wide with M8 Eccentric Pin£20.00
- IGV, STEUTE Bridge Contact Part Number: 33013Dimensions:41mm Long x 12mm Wide x 18mm High 14mm Between Pins£6.00
-
-
-
- STANNAH Type 250/260 Load Roller (with Bush) Part Number: 33666Dimensions:32mm Long x 20mm OD x 8mm ID£16.00
- STANNAH Carriage Roller (40mm OD) Part Number: 33672Dimensions:
40mm OD x 12mm Wide with 12mm Bearing (6001)
£11.00 - SEMATIC PZ18 Bridge Support for Landing Door (Right Hand) Part Number: 44080Dimensions:
90mm Long x 42mm Deep x 54mm Wide
£30.00
Loading ...
Load More ...












































































































































































































































