Manufacturer
- Product Types V Belts Remove This Item
- Product Types Inserts Remove This Item
- Product Types Skate Components Remove This Item
- Product Types Kicking Rollers Remove This Item
- Product Types Other Roller Remove This Item
- ACLA Concentric Pin & Top Hat Part Number: 10206Dimensions:
Pin: 56mm Long x 30mm OD with M8 Thread
Top Hat: 22.5mm Long x 30mm OD x 8mm ID
£16.00 - KONE Support Bracket to Suit AMD Coupler Part Number: 10987Dimensions:
49mm Long x 27mm Wide x 21mm Deep
£38.00 - KONE, SELCOM Fineline Hanger/Kicking Roller (Flat Track) Part Number: 11037Dimensions:
44mm OD x 13mm Wide x 15mm ID
£19.50 -
-
- KONE Nylon Kicking Roller For ADM/ADR (Curved Track) Part Number: 11126Dimensions:36mm OD x 14mm Wide with M8 Tapped Insert£19.25
- KONE Retractable Roller Part Number: 11132Dimensions:50mm OD x 20mm Wide x 1/2" ID (12.7mm)£19.50
-
-
-
- DOVER, HAMMOND & CHAMPNESS Large Skate Vane (Opening) Part Number: 11290Dimensions:510mm Long x 68mm Wide x 28mm Deep£49.00
- HAMMOND & CHAMPNESS Small Skate Vane (Closing) Part Number: 11291Dimensions:230mm Long x 29mm Wide x 26.5mm deep£24.90
- HAMMOND & CHAMPNESS Kicking Roller with M10 Pin Part Number: 11330Dimensions:22mm OD x 31mm Long
Pin - M10 x 10mm Long£19.50 - HAMMOND & CHAMPNESS Kicking Roller with M10 Pin Part Number: 11331Dimensions:22mm OD x 36mm Long
Pin - M10 x 15mm Long£19.50 - HAMMOND & CHAMPNESS Clutch Activating Arm Part Number: 11333Dimensions:170mm Long x 44mm Wide x 12.5mm Thick£22.00
- HAMMOND & CHAMPNESS Wedge V Belt (SPZ800) (10mm Wide) Part Number: 11337Dimensions:
800mm Long x 10mm Wide x 8mm Thick
£13.00 - HAMMOND & CHAMPNESS Drive Belt (3V 425)((9mm Wide) Part Number: 11338Dimensions:
1079mm Long x 9mm Wide x 8mm Thick
£18.00 - HAMMOND & CHAMPNESS Drive Belt (3V 500)(9.5mm Wide) Part Number: 11339Dimensions:
1270mm Long x 9.5mm Wide x 8mm Thick
£24.00 - ORONA Nylon Kicking Roller with M10 Eccentric Pin Part Number: 11712Dimensions:
26mm OD x 12.5mm Wide with M10 Eccentric Pin
£9.75 -
-
- GAL V Belt A45 (4L450/15Y06) Part Number: 12956Dimensions:
1143mm Long x 12.5mm Wide x 9mm Deep
£30.00 - GAL V Belt (A1100/A42) Part Number: 12967Dimensions:Inside Length - 1067mm, Outside Length 1118mm£8.50
- GAL Car Gate Roller with M6 Threaded Insert Part Number: 13018Dimensions:32mm OD x 12.5mm Wide with M6 x 25mm Threaded Insert£8.50
- GAL Skate Clutch Arm 9" with Offset Part Number: 13029Dimensions:
310mm Long x 32mm Wide x 22mm Deep with 44mm Fixing Hole Centres (Tapped 5/16")
£56.00 -
- GAL Rear Clutch Assembly LWZ-2-HA Part Number: 13038Dimensions:
392mm Long x 25mm Wide x 24mm Deep
£100.00 -
- GAL Clutch Link Arm 6" for L-2, LW-2, LWZ-2 Skates Part Number: 13120Dimensions:
233mm Long x 32mm Wide x 6.5mm Depth
£90.00 -
- EXPRESS Limit Roller with Rubber Tyre Part Number: 16108Dimensions:
69mm OD x 20mm Wide x 9.5mm ID
£45.00 - EXPRESS V Belt (Z690/Z26) (10mm Wide) Part Number: 16127Dimensions:690mm Long x 10mm Wide x 6mm Thick£8.50
-
-
-
-
- DUPAR / DEWHURST V Belt (SPZ1060) (10mm Wide) Part Number: 17712Dimensions:1060mm Long x 10mm Wide£14.00
- ALJO Nylon Kicking Roller with M12 Eccentric Pin (Curved Track) Part Number: 18204Dimensions:46mm OD x 16mm Wide with M12 Eccentric Pin£27.00
- ALJO Landing Release Roller with M8 Thread Part Number: 18205Dimensions:28mm OD x 20mm Wide with M8 x 32mm Long Stem£30.00
- FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 18830Dimensions:
26mm OD with M10 x 12mm Threaded Stud Total Length - 29mm
£21.00 -
-
- FERMATOR Skate Connector Arm Part Number: 18979Dimensions:
73.5mm Long x 22mm Wide x 29mm Deep with 57mm Fixing Hole Centres
£35.00 - FERMATOR Skate Trigger (Fixed) Stopping Retainer Assembly (Left Hand) Part Number: 19007Dimensions:105mm Long x 88mm Wide x 45mm Deep£42.00
- FERMATOR Skate Trigger (Fixed) Stopping Retainer Assembly (Right Hand) Part Number: 19037Dimensions:105mm Long x 88mm Wide x 45mm Deep£42.00
- FERMATOR Door Closer Roller on Shaft Part Number: 19041Dimensions:Shaft - 41mm Long x 9mm OD (Smallest) x 12.5mm OD (Largest) Roller - 30mm OD x 12mm Wide x 9mm ID£16.00
- FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 19092Dimensions:30mm OD x 14mm Wide with M10 Eccentric Pin£16.00
- FERMATOR Nylon Kicking Roller with M10 Eccentric Pin Part Number: 19107Dimensions:31mm OD x 14mm Wide with M10 Eccentric Pin£28.00
- FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 19112Dimensions:
33mm OD x 14.75mm Wide with M10 Eccentric Pin
£14.00 -



















































































































































































































