Manufacturer
- Product Types Ribbed Belts Remove This Item
- Product Types Skate Components Remove This Item
- Product Types Stairlift Rollers Remove This Item
- KONE Support Bracket to Suit AMD Coupler Part Number: 10987Dimensions:
49mm Long x 27mm Wide x 21mm Deep
£38.00 - KONE Ribbed Belt (12 Ribs) (PJ1245/490J) (28mm Wide) Part Number: 11000Dimensions:
1244mm Long x 28mm Wide x 3.5mm Thick
£35.00 - KONE Poly Ribbed Belt (12 Ribs) (PJ1397) (28mm Wide) Part Number: 11010Dimensions:
1397mm Long x 28mm Wide x 3.5mm Thick
£39.00 - KONE Poly V Flex Ribbed Belt (8 Ribs) (PJ1245/490J EL) (19mm Wide) Part Number: 11013Dimensions:
1244mm Long x 19mm Wide x 4mm Thick
£22.00 -
-
- DOVER, HAMMOND & CHAMPNESS Large Skate Vane (Opening) Part Number: 11290Dimensions:510mm Long x 68mm Wide x 28mm Deep£49.00
- HAMMOND & CHAMPNESS Small Skate Vane (Closing) Part Number: 11291Dimensions:230mm Long x 29mm Wide x 26.5mm deep£24.90
- HAMMOND & CHAMPNESS Clutch Activating Arm Part Number: 11333Dimensions:170mm Long x 44mm Wide x 12.5mm Thick£22.00
- GAL Skate Clutch Arm 9" with Offset Part Number: 13029Dimensions:
310mm Long x 32mm Wide x 22mm Deep with 44mm Fixing Hole Centres (Tapped 5/16")
£56.00 -
- GAL Rear Clutch Assembly LWZ-2-HA Part Number: 13038Dimensions:
392mm Long x 25mm Wide x 24mm Deep
£100.00 - GAL Clutch Link Arm 6" for L-2, LW-2, LWZ-2 Skates Part Number: 13120Dimensions:
233mm Long x 32mm Wide x 6.5mm Depth
£90.00 -
-
-
- FERMATOR Gear Belt 838mm (33") Long (7 Ribs) (16mm Wide) Part Number: 18964Dimensions:
838mm Long x 16mm Wide x 3.5mm Thick
£19.50 - FERMATOR Skate Connector Arm Part Number: 18979Dimensions:
73.5mm Long x 22mm Wide x 29mm Deep with 57mm Fixing Hole Centres
£35.00 - FERMATOR Skate Trigger (Fixed) Stopping Retainer Assembly (Left Hand) Part Number: 19007Dimensions:105mm Long x 88mm Wide x 45mm Deep£42.00
- FERMATOR Skate Trigger (Fixed) Stopping Retainer Assembly (Right Hand) Part Number: 19037Dimensions:105mm Long x 88mm Wide x 45mm Deep£42.00
-
-
- THYSSEN Ribbed Drive Belt (8 Ribs) (PJ559/220J EL) (19mm Wide) Part Number: 19168Dimensions:559mm Long x 19mm Wide x 4mm Thick£20.00
-
- OTIS Ribbed Reduction Belt (8 Ribs) (PJ660) (19mm Wide) Part Number: 20328Dimensions:660mm Long x 19mm Wide x 3mm Deep£20.00
- OTIS Unlocking Coupler Bracket to Suit Pax Part Number: 20367Dimensions:
76.75mm Long x 30mm - 48mm Wide x 62.5mm Deep
£28.00 - OTIS Skate Connector Pawl Part Number: 20379Dimensions:
71.5mm Long x 18.5mm Wide x 20mm Deep
£12.00 - MACPUARSA Reveco II Lever Stop Part Number: 29918Dimensions:27.75mm Long x 15mm Deep with 8mm ID£15.00
- MACPUARSA Reveco II Skate Bridge Support Assembly Part Number: 29962Dimensions:
212mm Long x 170mm Wide x 30.5mm Deep
£315.00 - MACPUARSA, SELCOM Ribbed Poly Belt (PJ1092) (14.5mm Wide) Part Number: 31986Dimensions:1092mm Long x 14.5mm Wide£18.00
- SELCOM Motor Idle Poly Belt - Opti Belt (6 Ribs) (RB/PJ965) (14mm Wide) Part Number: 31990Dimensions:
965mm Long x 14mm Wide x 4mm Thick
£25.00 - STANNAH Nylon Rack & Pinion Roller (Type 230) Part Number: 33608Dimensions:40mm OD x 11.6mm Wide x 12mm ID£4.50
- STANNAH Chair Roller (Type A - No Grooves) Part Number: 33610Dimensions:45mm OD x 13mm tyre Width x 12mm Centre£12.00
- STANNAH Chair Roller (Type B - 1 Groove) Part Number: 33611Dimensions:45mm OD x 13mm tyre width x 1.5mm ring depth x 12mm centre£12.00
- STANNAH Chair Roller (Type C - 2 Grooves) Part Number: 33612Dimensions:45mm OD x 13mm Tyre Width x 1.5mm Ring Depth x 12mm Centre£12.00
-
- STANNAH Stairlift Load Shaft Part Number: 33663Dimensions:
67.5mm Long x 10mm OD Pin with 12mm OD Shoulder
£18.00 - STANNAH Stairlift Carriage Roller (with Needle Bearing) Part Number: 33664Dimensions:48.5mm OD x 19.5mm Wide (max 22.5mm) x 15mm ID£35.00
- STANNAH Type 250 Load Roller (No Bush) Part Number: 33667Dimensions:32mm Long x 20mm OD x 10mm ID£7.95
- STANNAH Type 250 Roller (Concave) Part Number: 33668Dimensions:48mm Long x 45mm OD x 16mm ID£25.00
- STANNAH Chair Roller (No Grooves) Part Number: 33669Dimensions:45mm OD x 19mm Wide x 10mm ID£15.00
-
- CUMBRIA (LIFT ABLE) Chairlift Roller Part Number: 33700Dimensions:46mm OD x 10mm Wide x 15mm ID, Shoulder - 36mm OD x 7.5mm Wide
17.5mm Wide in Total£9.50 - CUMBRIA (LIFT ABLE) Nylon Centre (Load) Roller Part Number: 33702Dimensions:30mm OD x 11mm Wide x 12mm ID£6.00
- CUMBRIA (LIFT ABLE) Nylon Centre (Load) Roller Part Number: 33703Dimensions:30mm OD x 14mm Wide x 12mm ID£6.00
- CUMBRIA (LIFT ABLE) Nylon Chairlift Roller Part Number: 33704Dimensions:
46mm OD x 10mm Wide x 15mm ID, Shoulder is 36mm OD x 7.5mm Wide
17.5mm Wide in Total
£9.50 - SEMATIC Door Drive Belt 660J5 (5 Ribs) (12mm Wide) Part Number: 44043Dimensions:660mm Long x 12mm Wide£15.00
- SEMATIC Door Drive Belt 660J7 (7 Ribs) (17mm Wide) Part Number: 44044Dimensions:660mm Long x 17mm Wide x 4mm Thick with 7 Ribs£18.00
- SEMATIC Door Drive Belt (5 Ribs) (640PJ5) (11.8mm Wide) Part Number: 44060Dimensions:
640mm Long x 11.8mm Wide x 4mm Thick
£28.00 - SEMATIC Door Drive Belt (4 Ribs) (PJ660) (9.5mm Wide) Part Number: 44076Dimensions:
660mm Long x 9.5mm Wide x 3.5mm Thick
£13.00























































































































































































































