Manufacturer
- Product Types Pulleys Remove This Item
- Product Types Contact Sets Remove This Item
- Product Types Pins Remove This Item
- ACLA M10 Guide Roller Tapped Insert Part Number: 10201Dimensions:33mm Long with M10 tapped centre
Suits 2 x 6002ZZ Bearings£12.00 -
- ACLA M12 Tapped Guide Roller Tapped Insert Part Number: 10203Dimensions:57mm Long x 35mm OD£15.00
-
- ACLA M12 Guide Roller Tapped Insert Part Number: 10205Dimensions:
47mm Long x 35mm OD with M12 Tapped Hole
£15.00 - KONE Diverting Rope Pulley & Bracket (Left Hand) Part Number: 10994Dimensions:
119mm Long x 183.5mm Wide x 80mm Deep with 114mm OD Roller
£120.00 - KONE Diverting Rope Pulley & Bracket (Right Hand) Part Number: 10995Dimensions:
119mm Long x 183.5mm Wide x 80mm Deep with 114mm OD Roller
£120.00 - KONE AMD/AML Contact & Bridge (AZ-05) Part Number: 11030Dimensions:
72mm Long x 22mm Wide (40mm Including Cover) x 16mm Deep (25.5mm Including Cover)
£13.20 - KONE Steel AMDC1 Diverting Pulley (Left Hand) Part Number: 11086Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 130mm Wide x 50mm Deep
£35.00 - KONE Steel AMDC1 Diverting Pulley (Right Hand) Part Number: 11087Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 130mm Wide x 50mm Deep
£35.00 - KONE Steel AMD Diverting Pulley (Left Hand) Part Number: 11088Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 155mm Wide x 60mm Deep
£35.00 - KONE Steel AMD Diverting Pulley (Right Hand) Part Number: 11089Dimensions:Roller - 114mm OD x 6mm Wide
Bracket - 123.5mm High x 155mm Wide x 60mm Deep
£35.00 - KONE Toothed Belt Pulley on Bracket Part Number: 11092Dimensions:Bracket - 80mm Long x 43mm Wide x 42mm Deep
16mm Fixing Slot Centres - 60mm
Roller - 39mm OD x 20mm Wide£32.00 -
- KONE Toothed Belt Pulley on Bracket Suit ADV Eline Monospace Part Number: 11094Dimensions:Bracket - 80mm Long x 60mm Wide x 42mm Deep
20mm Fixing Slot Centres - 50mm x 15mm
Roller - 43mm OD x 35mm£36.00 - KONE, MEILLER Contact & Shunt (AMD) AZ-06 Part Number: 11101Dimensions:72 mm Long x 22 mm Wide£15.00
- KONE Divertor Pulley for Closing Weight Part Number: 11105Dimensions:
49mm OD x 10mm Wide x 12mm ID
£22.00 -
- KONE, MEILLER Contact Set ASO3 IP20 AZ061K Part Number: 11134Dimensions:50mm Long x 25mm Wide x 17mm Deep£14.50
- DUPAR / DEWHURST, HAMMOND & CHAMPNESS, PROPBROOK M10 Concentric Pin Part Number: 11227Dimensions:M10 Thread x 17mm OD£9.00
- DUPAR / DEWHURST, HAMMOND & CHAMPNESS, PROPBROOK M10 Eccentric Pin Part Number: 11228Dimensions:M10 Thread x 17mm OD£12.50
- HAMMOND & CHAMPNESS M12 Eccentric Pin Part Number: 11230Dimensions:35mm Total Length x M12 x 10mm Long Thread£9.50
- DOVER, HAMMOND & CHAMPNESS Pick Up Roller Shaft Part Number: 11298Dimensions:68mm Long x 12.5mm OD to suit 9.5mm ID Rollers£9.50
-
-
-
- ORONA Idle Pulley Tensioner Assembly PM-300 Part Number: 11709Dimensions:Bracket - 71mm Long (128mm Including M6 Bolt) x 46mm Wide
Roller - 32mm OD x 22mm Wide with M10 Concentric Pin£28.50 -
-
-
- GAL Stop Operator Pulley in Aluminium Part Number: 12982Dimensions:
Body - 63mm Long x 19mm Wide
Roller - 39mm OD x 20.5mm Wide£20.00 - GAL Drive Pulley Part Number: 13007Dimensions:Pulley - 325mm OD
Fixing Plate Hole Centres - 92mm x 46mm
£415.00 - GAL Door Contact Kit (Right Hand) Part Number: 13010Dimensions:Door Contact Kit (Right Hand)£32.00
-
- GAL Pulley Assembly with Sprocket (to Suit 1/2" Chain) Part Number: 13043Dimensions:
Pulley: 325mm OD x 19.3mm Wide with 13.25mm Track Width
Fixing Plate: 120mm Long x 74mm Wide x 119mm High (83mm x 47mm Hole Centres)£495.00 - GAL Motor Pulley with Keyway Part Number: 13050Dimensions:50mm OD x 16mm Wide x 5/8" (15.875mm) ID£44.00
- GAL Stop Operator Pulley in Aluminium Part Number: 13052Dimensions:
Body: 57mm Long x 6mm Wide x Thick 19mm
Roller: 40mm OD x 20.5mm Wide
£22.00 - EXPRESS Axle Pin for Limit Roller Part Number: 16109Dimensions:49mm Long x 9.5mm OD with 2 x 2.5mm Holes£12.50
- EXPRESS Eccentric Nut for 16112 Assembly Part Number: 16114Dimensions:
12.7mm (1/2") ID x 13.5mm Wide
£12.50 -
- EXPRESS Short Stroke Push Contact (Pack of 5) Part Number: 16176Dimensions:32mm Long x 6.5mm Wide x 2mm Thick£80.00
- DUPAR / DEWHURST M8 Eccentric Pin Part Number: 17706Dimensions:
55mm Long x 8mm OD with M8 x 12mm Thread
£15.00 - DUPAR / DEWHURST M10 Concentric Pin in Stainless Steel Part Number: 17708Dimensions:39mm Long x M10 Thread£14.00
- DUPAR / DEWHURST M8 Threaded Pin, Nuts & Washers Part Number: 17710Dimensions:30mm Thread x M8£13.00
- ALJO Overspeed Governor Switch Contact Box Set Part Number: 18177Dimensions:
80mm OD x 41.5mm Depth
£48.00 - ALJO Door Contact Set Part Number: 18187Dimensions:Contact - 50mm Long x 30mm Wide
Bridge - 50mm Long x 28mm High x 12.5mm Prong Centres£17.00 - ALJO Door Contact Set Part Number: 18189Dimensions:Contact - 50mm Long x 30mm Wide. Bridge - 50mm Long x 28mm deep x 12.5mm Prong Centres£17.00
- ALJO Pawl Pulley Set Part Number: 18208Dimensions:
53mm OD x 10mm Wide with 12mm OD x 48mm Long Shaft
£35.00 -
-

























































































































































































































