Manufacturer
- Product Types Aircord Accessories Remove This Item
- Product Types Belt Accessories Remove This Item
- Product Types Stairlift Rollers Remove This Item
- KONE AMD Closing Weight Rope Connector Part Number: 10986Dimensions:
Total Length 80mm with 2 x M8 x 16mm Fixings
£19.50 -
-
- FERMATOR, ORONA Aircord Tension Spring Part Number: 18836Dimensions:25mm Long x 9.50mm OD x 6mm ID£12.50
- FERMATOR Belt Clamp Part Number: 18920Dimensions:
56mm Long x 27mm Wide x 22.5mm Deep (Combined)
£10.50 - FERMATOR Aircord Support Bracket Part Number: 18942Dimensions:169mm Long x 53mm Wide x 56.5mm Deep£128.00
-
-
-
- FERMATOR Belt Support (Eagle) Part Number: 19019Dimensions:55mm Long x 20mm Wide x 23mm Thick£22.00
-
-
-
- THYSSEN Belt Fixing for VF08 Operator Part Number: 19213Dimensions:
25mm High x 45mm Wide x 21mm Deep (Combined)
£9.50 - OTIS Door Belt Clamp (Toothed) Part Number: 20329Dimensions:62mm Long x 27mm Wide x 20mm Deep£15.00
- OTIS Axle Pin to Suit Belt Clamp (DO2000/D2200) Part Number: 20339Dimensions:9.85mm OD x 27.5mm Wide x M6 ID£25.00
- OTIS 3mm Stainless Aircord Support Bracket Part Number: 20343Dimensions:
118mm Long x 30mm Wide x 30mm Deep
£9.50 - OTIS Belt Clamp to Suit PAX Doors (2 required) Part Number: 20344Dimensions:
34.5mm High x 99mm Wide x 8mm Thick (Each)
£15.00 - MACPUARSA Belt Clamp Set Reveco II-IV-GO (Toothed) Part Number: 29922Dimensions:
54mm Long x 10.5mm Wide (21mm Combined) x 20.5mm Deep
£29.00 - SELCOM Aircord Clamp Fixing to Suit 3mm Aircord Part Number: 31979CDimensions:
31mm Long x 3.5mm ID with M10 Thread
£12.50 -
- SELCOM Nylon Aircord Roller Cover Part Number: 32014Dimensions:
68mm Long x 49mm Wide x 10mm Deep
£4.00 -
- SELCOM Spring Hook 'S' Type Part Number: 32020Dimensions:
37.5mm Long x 22mm Wide x 4mm Thick
£3.00 -
- SELCOM Hydra Plus Belt Clamp Part Number: 32046Dimensions:
88mm Long x 16mm Wide x 10mm Deep (Open)
45mm Long x 16mm Wide x 13mm Deep (Clamped)£19.00 -
- SELCOM Hydra Plus Anti-Relax Belt Clip Part Number: 32086Dimensions:
90mm Long x 41mm Wide x 26mm with 68mm Hole Centres
£80.00 - SELCOM Hydra Plus Belt Clamp & Pin Part Number: 32088Dimensions:
94mm Long x 34mm Wide x 11.75mm Deep with M8 Tapped Pin
£30.00 - SELCOM Aircord Support Bracket & Rope Tightening Plate Part Number: 32905Dimensions:
1380mm Long x 55mm Wide x 25mm Deep
£120.00 - IGV M8 Hex Head Bolt Part Number: 32980Dimensions:
M8 Bolt with 8mm Long Thread (16.5mm Total Length)
£5.00 -
-
- STANNAH Nylon Rack & Pinion Roller (Type 230) Part Number: 33608Dimensions:40mm OD x 11.6mm Wide x 12mm ID£4.50
- STANNAH Chair Roller (Type A - No Grooves) Part Number: 33610Dimensions:45mm OD x 13mm tyre Width x 12mm Centre£12.00
- STANNAH Chair Roller (Type B - 1 Groove) Part Number: 33611Dimensions:45mm OD x 13mm tyre width x 1.5mm ring depth x 12mm centre£12.00
- STANNAH Chair Roller (Type C - 2 Grooves) Part Number: 33612Dimensions:45mm OD x 13mm Tyre Width x 1.5mm Ring Depth x 12mm Centre£12.00
-
- STANNAH Stairlift Load Shaft Part Number: 33663Dimensions:
67.5mm Long x 10mm OD Pin with 12mm OD Shoulder
£18.00 - STANNAH Stairlift Carriage Roller (with Needle Bearing) Part Number: 33664Dimensions:48.5mm OD x 19.5mm Wide (max 22.5mm) x 15mm ID£35.00
- STANNAH Type 250 Load Roller (No Bush) Part Number: 33667Dimensions:32mm Long x 20mm OD x 10mm ID£7.95
- STANNAH Type 250 Roller (Concave) Part Number: 33668Dimensions:48mm Long x 45mm OD x 16mm ID£25.00
- STANNAH Chair Roller (No Grooves) Part Number: 33669Dimensions:45mm OD x 19mm Wide x 10mm ID£15.00
-
- CUMBRIA (LIFT ABLE) Chairlift Roller Part Number: 33700Dimensions:46mm OD x 10mm Wide x 15mm ID, Shoulder - 36mm OD x 7.5mm Wide
17.5mm Wide in Total£9.50 - CUMBRIA (LIFT ABLE) Nylon Centre (Load) Roller Part Number: 33702Dimensions:30mm OD x 11mm Wide x 12mm ID£6.00
- CUMBRIA (LIFT ABLE) Nylon Centre (Load) Roller Part Number: 33703Dimensions:30mm OD x 14mm Wide x 12mm ID£6.00
- CUMBRIA (LIFT ABLE) Nylon Chairlift Roller Part Number: 33704Dimensions:
46mm OD x 10mm Wide x 15mm ID, Shoulder is 36mm OD x 7.5mm Wide
17.5mm Wide in Total
£9.50 - AUTUR Steel Aircord Ends Part Number: 36006Dimensions:Tapped End - M8 x 43mm Thread (55mm Total Lengh)
Plain End - 20mm Long x 16mm OD£18.00 - SEMATIC Belt Clamp for 'K' Car Doors Part Number: 44084Dimensions:
55mm Long x 32mm Wide x 30mm Deep
£52.00





























































































































































































































