Manufacturer
- Product Types Guide Roller Assemblies Remove This Item
- Product Types Belt Accessories Remove This Item
- Product Types Skate Components Remove This Item
- KONE Support Bracket to Suit AMD Coupler Part Number: 10987Dimensions:
49mm Long x 27mm Wide x 21mm Deep
£38.00 -
-
-
- DOVER, HAMMOND & CHAMPNESS Large Skate Vane (Opening) Part Number: 11290Dimensions:510mm Long x 68mm Wide x 28mm Deep£49.00
- HAMMOND & CHAMPNESS Small Skate Vane (Closing) Part Number: 11291Dimensions:230mm Long x 29mm Wide x 26.5mm deep£24.90
- HAMMOND & CHAMPNESS Clutch Activating Arm Part Number: 11333Dimensions:170mm Long x 44mm Wide x 12.5mm Thick£22.00
- GAL Skate Clutch Arm 9" with Offset Part Number: 13029Dimensions:
310mm Long x 32mm Wide x 22mm Deep with 44mm Fixing Hole Centres (Tapped 5/16")
£56.00 -
- GAL Rear Clutch Assembly LWZ-2-HA Part Number: 13038Dimensions:
392mm Long x 25mm Wide x 24mm Deep
£100.00 - GAL Clutch Link Arm 6" for L-2, LW-2, LWZ-2 Skates Part Number: 13120Dimensions:
233mm Long x 32mm Wide x 6.5mm Depth
£90.00 -
-
-
- FERMATOR Belt Clamp Part Number: 18920Dimensions:
56mm Long x 27mm Wide x 22.5mm Deep (Combined)
£10.50 -
-
- FERMATOR Skate Connector Arm Part Number: 18979Dimensions:
73.5mm Long x 22mm Wide x 29mm Deep with 57mm Fixing Hole Centres
£35.00 - FERMATOR Skate Trigger (Fixed) Stopping Retainer Assembly (Left Hand) Part Number: 19007Dimensions:105mm Long x 88mm Wide x 45mm Deep£42.00
- FERMATOR Belt Support (Eagle) Part Number: 19019Dimensions:55mm Long x 20mm Wide x 23mm Thick£22.00
- FERMATOR Skate Trigger (Fixed) Stopping Retainer Assembly (Right Hand) Part Number: 19037Dimensions:105mm Long x 88mm Wide x 45mm Deep£42.00
-
-
-
- THYSSEN Belt Fixing for VF08 Operator Part Number: 19213Dimensions:
25mm High x 45mm Wide x 21mm Deep (Combined)
£9.50 -
- OTIS Door Belt Clamp (Toothed) Part Number: 20329Dimensions:62mm Long x 27mm Wide x 20mm Deep£15.00
- OTIS Axle Pin to Suit Belt Clamp (DO2000/D2200) Part Number: 20339Dimensions:9.85mm OD x 27.5mm Wide x M6 ID£25.00
- OTIS Belt Clamp to Suit PAX Doors (2 required) Part Number: 20344Dimensions:
34.5mm High x 99mm Wide x 8mm Thick (Each)
£15.00 - OTIS Unlocking Coupler Bracket to Suit Pax Part Number: 20367Dimensions:
76.75mm Long x 30mm - 48mm Wide x 62.5mm Deep
£28.00 - OTIS Skate Connector Pawl Part Number: 20379Dimensions:
71.5mm Long x 18.5mm Wide x 20mm Deep
£12.00 - MACPUARSA Reveco II Lever Stop Part Number: 29918Dimensions:27.75mm Long x 15mm Deep with 8mm ID£15.00
- MACPUARSA Belt Clamp Set Reveco II-IV-GO (Toothed) Part Number: 29922Dimensions:
54mm Long x 10.5mm Wide (21mm Combined) x 20.5mm Deep
£29.00 - MACPUARSA Reveco II Skate Bridge Support Assembly Part Number: 29962Dimensions:
212mm Long x 170mm Wide x 30.5mm Deep
£315.00 - SELCOM Hydra Plus Belt Clamp Part Number: 32046Dimensions:
88mm Long x 16mm Wide x 10mm Deep (Open)
45mm Long x 16mm Wide x 13mm Deep (Clamped)£19.00 - SELCOM Hydra Plus Anti-Relax Belt Clip Part Number: 32086Dimensions:
90mm Long x 41mm Wide x 26mm with 68mm Hole Centres
£80.00 - SELCOM Hydra Plus Belt Clamp & Pin Part Number: 32088Dimensions:
94mm Long x 34mm Wide x 11.75mm Deep with M8 Tapped Pin
£30.00 - SEMATIC Belt Clamp for 'K' Car Doors Part Number: 44084Dimensions:
55mm Long x 32mm Wide x 30mm Deep
£52.00 - SEMATIC Complete Set of Skate Arms Part Number: 44094Dimensions:
250mm Long x 58mm Wide x 12mm Deep
£160.00 - SEMATIC Complete Set of Skate Arms Part Number: 44095Dimensions:
510mm Long x 58mm Wide x 12mm Deep
£180.00 - SEMATIC Belt Clamp For Skate Part Number: 44113Dimensions:
43mm Long x 38mm Wide x 29mm Deep
£79.00 -
- MEILLER Clamping Plate for Synchronous Belt Part Number: 66519Dimensions:77mm Long x 28mm Wide x 28mm Deep£11.00
- MEILLER Support Bracket Bump Stop Part Number: 66547Dimensions:
159mm Long x 30mm Wide x 25mm Deep
£12.00 - MEILLER Support Bracket for Belt Clamp Part Number: 66548Dimensions:
50mm High x 100mm Wide x 25.5mm Deep
£30.00 - SCHINDLER Door Arm Lever for QKS8 Part Number: 70742Dimensions:84mm Long x 37mm Wide x 50mm Deep (Including Arm)
2 x 5mm Holes (Hole Centres - 26mm) 2 x 6mm Holes (Hole Centres - 72mm).£50.00 -
- SCHINDLER Door Arm Lever for QKS9 Part Number: 70748Dimensions:110mm Long x 45mm Wide x 16mm Thick
Arm - 45mm Long x 12mm OD£32.00 - SCHINDLER Skate Connector Arm Part Number: 70749Dimensions:
84mm Long x 24.5mm Wide x 49mm deep
£47.00 - SCHINDLER Skate Arm to Suit QKS8 Part Number: 70752Dimensions:84mm Long x 38mm Wide x 35mm Deep (Including Arm)£50.00









































































































































































































































