Manufacturer
- Product Types Guide Roller Pins Remove This Item
- Product Types Door Closer Accessories Remove This Item
- Product Types Door Drives Remove This Item
-
- ACLA M10 Guide Roller Tapped Insert Part Number: 10201Dimensions:33mm Long with M10 tapped centre
Suits 2 x 6002ZZ Bearings£12.00 -
- ACLA M12 Tapped Guide Roller Tapped Insert Part Number: 10203Dimensions:57mm Long x 35mm OD£15.00
-
- ACLA M12 Guide Roller Tapped Insert Part Number: 10205Dimensions:
47mm Long x 35mm OD with M12 Tapped Hole
£15.00 - ACLA Concentric Pin & Top Hat Part Number: 10206Dimensions:
Pin: 56mm Long x 30mm OD with M8 Thread
Top Hat: 22.5mm Long x 30mm OD x 8mm ID
£16.00 - ORONA V3F5 Drive Kit & Adaptor Part Number: 11748Dimensions:
125mm Wide x 340mm Long x 35mm Deep
£795.00 -
- GAL Door Closer, Slow Door Link & Bracket (8 1/4") - 2SP & 2SP/CP Part Number: 13088Dimensions:
290mm Long x 117mm Wide x 55mm Deep
£195.00 -
- GAL Door Closer Spring Support Bracket Part Number: 13090Dimensions:98mm Long x 82mm Wide x 25.5mm Deep£70.00
- GAL Door Closer Bracket Part Number: 13095Dimensions:Bracket - 120mm Long x 74mm Wide x 34mm Deep
Arm - 340mm Long£200.00 - GAL Stainless Steel Crank Arm Assembly (13 7/16") Part Number: 13122Dimensions:
13 7/16"(340mm) Long x 1 1/2" (39mm) Wide x 8mm Thick
£180.00 - ALJO Door Gear Drive Wheel (70 Teeth) Part Number: 18198Dimensions:
110mm OD x 18mm Wide x 25mm ID
£95.00 - FERMATOR Closing Spring Safety Support Fixing Part Number: 18792Dimensions:35mm Long x 18mm OD£20.50
- FERMATOR Busmatic Door Stop Part Number: 18972Dimensions:
20mm Long x 15mm Wide x 15mm Deep with M6 x 25mm Bolt
£22.00 - FERMATOR Door Closer Spring Fixing Part Number: 19033Dimensions:
22mm Long x 17mm Wide x 10mm Deep
£8.50 - MACPUARSA Closing Door Stop to Suit T2/T3 Part Number: 29953Dimensions:
60mm Total Length x 29.25mm Wide x 11mm Deep
£15.50 - SELCOM Magnet Retainer for ECO/Hydra/Augusta Part Number: 31889Dimensions:
25mm OD x M4 ID x 15mm Wide
£22.00 - SELCOM HydraPlus Cam Release Ramp Part Number: 32056Dimensions:
84mm Long x 38mm Wide x 20mm Deep with 63mm Hole Centres
£15.00 - CEITA Door Closer Arm with Nylon Roller (AZ121) Part Number: 35001Dimensions:Arm - 349mm Long x 20mm Wide x 26.5mm Deep
Roller - 23.5mm OD x 14mm Wide£30.00 - CEITA Door Closer Arm with Nylon Roller (AZ128) Part Number: 35002Dimensions:Arm - 349mm Long x 20mm Wide x 26mm Deep
Roller - 24mm OD x 14.5mm Wide£30.00 - DOPPLER Door Drive YS-K01 Part Number: 59997Dimensions:
230mm Long x 126mm Wide x 53mm Deep
£650.00 - DOPPLER Key Panel for Door Drive YS-P02-C Part Number: 59998Dimensions:
110mm Long x 70mm Wide x 16.5mm Deep
£120.00 - MEILLER Motor 200kg / CAN / IP 54 (Left Hand) Part Number: 66559Dimensions:
240mm Long x 63.5m Wide x 96mm Deep
£600.00 -
-
-
-
- SLYCMA Pin to Suit Part No. 88010 Part Number: 88015Dimensions:
36mm Long x M8 x 13mm Thread
£14.50 - MISCELLANEOUS M10 Concentric Pin to Suit 10mm Bearing (6000) Part Number: 90020Dimensions:46mm Long x 19mm Wide Hexagon x 23mm Long Thread£12.50
- MISCELLANEOUS Nylon Block Axle Assembly to Suit A1030 Part Number: 90021Dimensions:Shaft - 86mm Long x 15mm OD (Max)
Blocks - 25mm Long x 16mm Wide x 19mm Deep£27.50 - ARITCO Landing Door Closer Slide Part Number: 94000Dimensions:45mm Long x 23mm Wide x 19mm Deep with M8 Bolt£32.00
-
- EXPRESS 1/2" Concentric Pin to Suit D1132 on R43 Assembly Part Number: L1275Dimensions:
1/2" Thread x 5" Long Total Length
£95.00 -
- FURSE M12 Concentric Guide Roller Pin to Suit 15mm Bearing Part Number: M1215CDimensions:86mm Long x with M12 x 43mm Thread£28.00
- WADSWORTH M12 Concentric Pin & Spacer Washer Part Number: M1233CDimensions:
70.5mm Long x 60mm OD with M12 Thread x 32mm Long
£32.00 -
-
- KONE M16 Concentric Pin to Suit N1538 Part Number: M1692CDimensions:
92mm Total Length with M16 x 23mm Thread
£22.00 - MISCELLANEOUS M20 Eccentric Pin to Suit 25mm Bearing Part Number: M2025ELDimensions:40mm Long Pin x 21mm Wide Hexagon x 40mm Long Thread£24.00
-
- MISCELLANEOUS M22 Tapped Eccentric Pin to Suit P1233 Part Number: M2267EDimensions:
67mm Long with M22 Tapped ID
£55.00 - GAL Lower Linkage Arm (31" Long) Part Number: ZZ1612Dimensions:
790mm (31") Length x 16mm Width x 3mm Deep
5 x 8mm Fixing Holes (43mm Hole Centres)
2 x Slotted 28mm Fixing Holes (50.5mm Hole Centres)Price on Request




















































































































































































































