Manufacturer
- Outside Diameter 31-40 Remove This Item
- Outside Diameter 21-30 Remove This Item
- Outside Diameter 11-20 Remove This Item
- ORONA Nylon Skate Roller Part Number: 11720Dimensions:33mm OD x 9mm Wide x 10mm ID
Shoulder - 15mm OD x 5mm Deep£6.00 -
- KOMEPA Nylon Door Hanger Roller with M10 Pin (Curved Track) Part Number: 11800Dimensions:35mm OD x 12.5mm Wide with M10 x 12mm Pin (4mm Shoulder)£14.70
-
-
-
- GAL Pick Up Wheel & Stem Part Number: 12963Dimensions:
40mm OD x 20mm Wide x 42mm Long Shaft
£10.00 - GAL Pick Up Wheel & Stem Part Number: 12964Dimensions:
40mm OD x 13mm Wide x 41mm Long Shaft
£19.50 - GAL Steel Upthrust Roller Part Number: 12968Dimensions:28.5mm OD x 9.5mm Wide with 3/8" x 14mm Thread£10.50
- GAL Pick Up Wheel & Stem Part Number: 12969Dimensions:40mm OD x 10mm Wide x 45mm Long Shaft£15.00
- GAL Activating Cam Roller Part Number: 12972Dimensions:
21mm OD x 10mm Wide with 3mm Shoulder (13mm Total Width) x 8mm ID
£7.50 - GAL Stop Operator Pulley in Aluminium Part Number: 12982Dimensions:
Body - 63mm Long x 19mm Wide
Roller - 39mm OD x 20.5mm Wide£20.00 - GAL Arm & Roller Assembly Part Number: 12983Dimensions:105mm Long with 32mm OD x 13mm Wide Roller£16.95
-
- GAL Door Closer Assembly (Spring, Rod & Bracket) Part Number: 13013Dimensions:Spring - 470mm Long x 16.5mm OD
Rod - 485mm Long x 8mm OD
Bracket - 51mm Long x 16mm Wide x 16mm Deep£45.00 - GAL Car Gate Roller with M6 Threaded Insert Part Number: 13018Dimensions:32mm OD x 12.5mm Wide with M6 x 25mm Threaded Insert£8.50
- GAL Stop Operator Pulley in Aluminium Part Number: 13052Dimensions:
Body: 57mm Long x 6mm Wide x Thick 19mm
Roller: 40mm OD x 20.5mm Wide
£22.00 - GAL Escutcheon to Suit GAL Drop Key Part Number: 13053Dimensions:36mm Long x with 19mm x 1.25mm lip x 13.5mm OD Body, reducing to 12.5mm at bottom x 10mm ID£10.00
-
-
- EXPRESS Landing Door Closer Roller Part Number: 16163Dimensions:39mm OD x 16mm Wide x 10mm ID£12.00
- EXPRESS Pick Up Roller with M8 Concentric Stem Part Number: 16168Dimensions:Roller- 36mm OD x 19mm Wide
Pin- M8 x 60mm Long
£18.00 - EXPRESS Pick Up Roller with M8 Eccentric Stem Part Number: 16169Dimensions:Roller- 36mm OD x 19mm Wide
Pin - M8 x 60mm Long£18.50 -
-
-
- EXPRESS Rubber Guide Roller Buffer with Square Locator Part Number: 16182Dimensions:39mm OD x 16mm Wide x 12mm ID£12.50
- EXPRESS Steel Clip Part Number: 16183Dimensions:74mm Long (Total) x 20mm OD x 13mm ID x 10mm Wide x 1.5mm Thick£2.00
-
- DUPAR / DEWHURST Landing Lock Arm Mounting Bracket Part Number: 17671Dimensions:127mm Long x 63.5mm Wide x 6mm Deep with 12.7mm OD Pin£20.00
- DUPAR / DEWHURST Extension Sleeve & Bar to Suit VL10/VL20/VL30 Part Number: 17689Dimensions:
12.7mm OD x 260mm Long
£45.00 - DUPAR / DEWHURST Nylon Pick Up Roller Part Number: 17697Dimensions:32mm OD x 16mm Wide x 7.5mm ID£12.00
- DUPAR / DEWHURST Nylon Pick Up Roller Part Number: 17707Dimensions:38mm OD x 18mm Wide x 8mm ID£6.50
- ALJO Unlocking Roller & Arm Part Number: 18186Dimensions:112mm Long x 73mm Wide
Roller - 34mm OD x 15.5mm Wide on M8 Threaded Stem£20.00 - ALJO Unlocking Roller for 104 Lock with M8 Thread Part Number: 18195Dimensions:73mm Long x 34mm OD x 15.5mm Wide x M8 Thread£12.50
-
- ALJO, FERMATOR Bottom Track Door Shoe (Small) Part Number: 18197Dimensions:
56mm Long x 14mm OD x 8mm Wide
Screw Fixing Centres - 25mm
£12.50 - ALJO Landing Release Roller with M8 Thread Part Number: 18205Dimensions:28mm OD x 20mm Wide with M8 x 32mm Long Stem£30.00
- FERMATOR Carriage Support Bracket & Roller (Left Hand) Part Number: 18710Dimensions:
Bracket - 50mm Long x 22.5mm Wide x 18mm Deep
Roller - 33.5mm OD x 9.5mm Wide£15.00 - FERMATOR Carriage Support Bracket & Roller (Right Hand) Part Number: 18711Dimensions:
Bracket - 50mm Long x 22.5mm Wide x 18mm Deep
Roller - 33.5mm OD x 9.5mm Wide£15.00 - FERMATOR Horizontal Sliding Drive Wheel Part Number: 18712Dimensions:
40mm OD x 16.75mm with M10 x 21mm Pin
£20.00 - FERMATOR Closing Spring (340mm Loop Centres) Part Number: 18788Dimensions:354mm Long (340mm Loop Centres) x 16mm OD£20.00
- FERMATOR Closing Spring (427mm Loop Centres) Part Number: 18789Dimensions:442mm Long (427mm Loop Centres) x 15mm OD£20.00
- FERMATOR Closing Spring (458mm Loop Centres) Part Number: 18790Dimensions:474mm Long (458mm Loop Centres) x 16mm OD£20.00
- FERMATOR Closing Spring (547.5mm Loop Centres) Part Number: 18791Dimensions:560mm Long (547.5mm Loop Centres) x 16mm OD£20.00
- FERMATOR Closing Spring Safety Support Fixing Part Number: 18792Dimensions:35mm Long x 18mm OD£20.50
-
- FERMATOR Pick Up Assembly (Left Hand) Part Number: 18823Dimensions:
150mm Long x 97.5mm Wide x 72mm Deep Complete with 2 x Pick Up Rollers - 39mm OD x 13mm Wide
£200.00 - FERMATOR Pick Up Roller Part Number: 18824Dimensions:
39mm OD x 12.7mm Wide with M10 x 33mm Threaded Stem
£28.00 - FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 18830Dimensions:
26mm OD with M10 x 12mm Threaded Stud Total Length - 29mm
£21.00





























































































































































































































