Manufacturer
- Outside Diameter 141-150 Remove This Item
- Outside Diameter 11-20 Remove This Item
- Outside Diameter 0-10 Remove This Item
- SCHINDLER Door Spring Part Number: 77059Dimensions:
695mm Long (Between Loop Centres) x 705mm Long (Total Length) x 14mm OD
£35.00 -
-
- SCHINDLER 2mm Aircord (800mm Centre Opening) to Suit QKS11T Part Number: 77091Dimensions:2mm x 1230mm Long x M5 Threaded Fixing£30.00
- SCHINDLER Varidor Skate Spring Part Number: 77106Dimensions:95mm Total Length (81mm Between Hole Centres) x 11mm OD£49.00
- SCHINDLER Dumbwaiter Aircord Kit Part Number: 77109Dimensions:
1.5mm x 2820mm Long with 1 x M6 & Hook Fixings
£19.00 - SCHINDLER M8 Concentric Type 'S' Threaded Pin (QKS11) Part Number: 77143Dimensions:16mm OD (max) x 27.5mm long with M8 x 9.5mm Thread£6.30
- SCHINDLER Rivet (QKS11) Part Number: 77144Dimensions:16mm OD Base x 10mm OD Shaft x 22mm Wide x 10mm ID£6.50
- SCHINDLER Door Bumper QKS 8 -11 3 Vol - 4 Voc Part Number: 77270Dimensions:15mm OD x 2.5mm Base Width£9.00
- SCHINDLER Rubber Bumper for Swing Door Part Number: 77271Dimensions:16mm OD, 5mm Bumper Depth£5.00
-
-
-
- PRISMA Skate Spring Part Number: 79743Dimensions:
11.5mm OD x 63mm Long (Between Hook Centres)
£38.00 - SCHMERSAL Magnetic Reed Pencil Switch BN65-10Z Part Number: 85817Dimensions:
13mm OD x 1000mm Long Cable
£74.00 - SCHMERSAL Magnetic Reed Pencil Switch BN650-01Z/V N/C Part Number: 85818Dimensions:
13mm OD x 1000mm Long Cable
£75.00 -
- MISCELLANEOUS Nylon Block Axle Assembly to Suit A1030 Part Number: 90021Dimensions:Shaft - 86mm Long x 15mm OD (Max)
Blocks - 25mm Long x 16mm Wide x 19mm Deep£27.50 - MISCELLANEOUS Reducing Sleeve 17mm to 8mm Part Number: 91708Dimensions:17mm OD x 12mm Wide x 8mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 17mm to 10mm Part Number: 91710Dimensions:17mm OD x 12mm Wide x 10mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 17mm to 12mm Part Number: 91712Dimensions:17mm OD x 12mm Wide x 12mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 17mm to 12.7mm Part Number: 91713Dimensions:17mm OD x 12mm Wide x 12.7mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 17mm to 15mm Part Number: 91715Dimensions:17mm OD x 12mm Wide x 15mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 20mm to 10mm Part Number: 92010Dimensions:20mm OD x 12mm Wide x 10mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 20mm to 12mm Part Number: 92012Dimensions:20mm OD x 12mm Wide x 12mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 20mm to 12.7mm Part Number: 92013Dimensions:20mm OD x 12mm Wide x 12.7mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 20mm to 15mm Part Number: 92015Dimensions:20mm OD x 12mm Wide x 15mm ID£5.00
- MISCELLANEOUS Reducing Sleeve 20mm to 17mm Part Number: 92017Dimensions:20mm OD x 12mm Wide x 17mm ID£5.00
- MISCELLANEOUS Red Door Stop Part Number: 93965Dimensions:
18.5mm OD of Head x 11mm Wide
Head with M8 x 30mm Bolt£9.50 - ARITCO Retaining Ramp Spring Part Number: 94004Dimensions:103mm Long (88mm Between Loop Centres) x 12mm OD£75.00
- MISCELLANEOUS Control Cabinet Key Part Number: 98989Dimensions:
88mm Long x 13mm OD with 7mm x 7mm Square Slot
£18.00 -
- MISCELLANEOUS T Bar Key Tapered Square Drive Key Part Number: 99007Dimensions:
100mm Long x 9mm OD with 6.5mm Square End
£9.00 - MISCELLANEOUS 2A Cartridge Fuse (Fast Acting) (240V) Part Number: 99210Dimensions:
25.5mm Long x 6.5mm OD
£0.40 - MISCELLANEOUS 4A Cartridge Fuse (Fast Acting) (250V) Part Number: 99211Dimensions:
20mm Long x 5mm OD
£0.40 - MISCELLANEOUS Motor Encoder Coupling Part Number: 99250Dimensions:
18mm OD x 23mm Long x 6mm ID
£30.00 - MISCELLANEOUS A - Type Buffer 20/20 Part Number: 99422Dimensions:20mm OD x 20mm Wide with M6 x 15mm Thread£9.70
- HOLLISTER WHITNEY Aluminium Sleeve Part Number: 99980Dimensions:29mm Long x 17mm OD x 12.7mm (1/2") ID£12.50
- HOLLISTER WHITNEY Aluminium Sleeve Part Number: 99984Dimensions:
38mm Long x 17mm OD x 12.7mm (1/2") ID
£15.00 - MISCELLANEOUS Giovenzana Limit Switch 1NO+1NC Part Number: 99987Dimensions:
79mm Long x 31mm Wiode x 30mm Deep with 17.5mm OD Roller
£14.00 - ACLA, SCHINDLER Guide Roller (150mm OD) with Aluminium Core Part Number: A1530Dimensions:
150mm OD x 30mm Wide (Tapering to 12mm) with 2 x 12mm Bearings (6201)
£105.00 - MISCELLANEOUS Polyurethane Guide Roller (150mm OD) with Cast Iron Core Part Number: A1540Dimensions:
150mm OD x 40mm Wide x 48mm Hub with 2 x 20mm Bearings (6204ZZ)
£65.00 - MISCELLANEOUS Polyurethane Guide Roller (150mm OD) with Cast Iron Core Part Number: A1550Dimensions:150mm OD x 50mm Wide (60mm Hub) - 2 x 20mm Bearings (6204Z)£69.00
- ACLA Polyurethane Guide Roller (148mm OD) with Cast Iron Core Part Number: B1484Dimensions:
148mm OD x 38mm Wide (40mm Hub) with 2 x 25mm Bearings (6205)
£195.00 - MISCELLANEOUS Polyurethane Guide Roller (150mm OD) with Cast Iron Core Part Number: B1542Dimensions:150mm OD x 40mm Wide with 2 x 20mm Bearings (6204ZZ)£66.00
- SABIEM Polyurethane Guide Roller (150mm OD) with Cast Iron Core Part Number: D1530Dimensions:150mm OD x 30mm Wide with 2 x 25mm Bearings (6005ZZ)£49.00
- MISCELLANEOUS Polyurethane Guide Roller (150mm OD) with Cast Iron Core Part Number: D1534Dimensions:
150mm OD x 35mm Wide with 2 x 25mm Bearings (6005)
£53.00 - MISCELLANEOUS Polyurethane Guide Roller (150mm OD) with Cast Iron Core Part Number: D1535Dimensions:150mm OD x 35mm Wide with 2 x 20mm Bearings (6204)£48.00
- EXPRESS Polyurethane Guide Roller (152.4mm/6" OD) with Aluminium Core Part Number: D1537Dimensions:
152.4mm (6") OD x 30mm Wide (tapering to 20mm) with 2 x 17mm Bearings (6203RS)
£72.00 - SABIEM Polyurethane Guide Roller (150mm OD) with Cast Iron Core Part Number: D1540Dimensions:150mm OD x 40mm Wide with 2 x 25mm Bearings (6005ZZ)£58.00




























































































































































































