Manufacturer
- Length/Height 61-80 Remove This Item
- Length/Height 21-40 Remove This Item
- Length/Height 0-20 Remove This Item
-
- ELECTRA VITORIA 70mm Long Guide Shoe to Suit 16mm Guide Rail Part Number: 39921Dimensions:70mm Long x 36mm Wide x 30mm Deep 16mm Slot Width£20.00
- CENTODUCATI 80mm Long Guide Shoe Part Number: 39945Dimensions:80mm Long x 38mm Wide x 22mm Deep
Hole Centres - 60mm£20.00 - SABIEM 69mm Long Nylon Guide Shoe Liner to Suit 6mm Guide Rail Part Number: 40472Dimensions:69mm Long x 20mm Wide x 31.5mm Deep£15.00
-
- SEMATIC Nylon Landing Door Lock Roller with Eccentric Pin Part Number: 44013Dimensions:30mm OD x 11.5mm Wide with M10 x 25mm Long Thread£15.00
- SEMATIC Rubber Buffer for Carriage Stop Part Number: 44027Dimensions:12mm High x 22mm Wide x 14mm Deep£5.00
- SEMATIC Roller with M6 Concentric Pin for Retractable Skate Part Number: 44028Dimensions:27mm OD x 10.5mm Wide with M6 x 13mm Thread£30.00
-
- SEMATIC Mild Steel Door Shoe with Nylon Gib Part Number: 44041Dimensions:80mm Long x 28mm Wide (7.5mm Wide Gib) x 38mm Deep with 64mm Hole Centres£12.00
- SEMATIC Flexible Door Lock Buffer Part Number: 44070Dimensions:20mm Height x 19mm OD x 9.5mm ID£3.50
- SEMATIC Landing Door Lock Release (Left Hand Panel) Part Number: 44087Dimensions:
37mm High x 46.5mm Wide x 28mm Deep
£85.00 - SEMATIC Landing Door Lock Release (Right Hand Panel) Part Number: 44088Dimensions:
37mm High x 46.5mm Wide x 28mm Deep
£110.00 - SEMATIC Magnet to Suit Retractable Skate Arms Part Number: 44106Dimensions:20mm OD x 10mm Wide x 4.25mm ID£30.00
- SEMATIC Polyurethane Door Gib Part Number: 44108Dimensions:
19mm Long x 10mm Wide x 20mm Deep
£7.00 - KRONENBERG Reversing Bearing Block U-O Above Actuation Part Number: 44214Dimensions:80mm High x 110mm Wide x 78mm Deep£170.00
- KRONENBERG Reversing Bearing Block U-U Below Actuation Part Number: 44218Dimensions:
80mm High x 110mm Wide with 41.5mm OD Lock Roller
£170.00 - ELEX, KOMEPA Contact & Shunt Part Number: 44500Dimensions:
Contact - 72mm Long x 22mm High x 20mm Deep
Bridge - 40mm Long x 18mm High x 14mm Deep x 6mm Thick£18.00 - FUJITEC Bridge Contact Part Number: 44700Dimensions:80mm Long x 12mm Wide at top x 16.5mm Deep with 2 x 6mm Wide prongs 3.5mm apart£12.00
- FUJITEC Snap Together Nylon Door Shoe (Pair) Part Number: 44703Dimensions:60mm Long x 10.5mm Wide x 4mm Thick£10.00
- FUJITEC Fire Rated Door Shoe Part Number: 44711Dimensions:67mm Long x 26mm Wide (12.5mm Wide Gib) x 43mm Deep with 30mm Hole Centres£9.50
- FUJITEC Aircord Roller & Assembly Bracket (Short) Part Number: 44714Dimensions:
Bracket: 80mm High x 110mm Wide x 35mm Deep with 2 x M8 Fixing Holes (80mm Hole Centres)
Roller: 68mm OD x 10mm Wide£80.00 - MITSUBISHI Mild Steel Door Shoe with Nylon Gib Part Number: 44803Dimensions:64mm Long x 11.5mm Wide x 40mm Deep with 34mm Hole Centres£9.50
- MITSUBISHI Contact & Shunt Part Number: 44810Dimensions:
Contact - 63mm Long x 29mm Wide x 32mm Deep
Shunt - 67mm Long x 25mm Wide x 6mm Thick£15.00 - PRUDHOMME GV Lock Deadbolt Bush Part Number: 45005Dimensions:
69mm Long x 26mm Wide x 29.5mm Deep
£18.00 - ASCEL, MONITOR Mild Steel Door Shoe with Polyurethane Gib Part Number: 49950Dimensions:
70mm Long x 20mm Wide (13mm Wide Gib) x 30mm Deep with 50mm Hole Centres
£30.00 - PICKERINGS, THYSSEN Door Shoe with Felt Liner - M3TK Part Number: 52746Dimensions:
80mm Long x 10mm Wide x 40mm Deep with 3 x M5 Fixings
£45.00 - PICKERINGS, THYSSEN Door Shoe with Vulkollan Liner - M3TK Part Number: 52747Dimensions:
80mm Long x 10mm Wide x 43mm Deep with 3 x M5 Fixings
£58.00 - PICKERINGS, THYSSEN Nylon Door Gib Part Number: 52750Dimensions:80mm Long x 9mm Wide x 41mm Deep with 28mm Hole Centres£18.00
- PICKERINGS, THYSSEN Aluminium Door Bracket Part Number: 52754Dimensions:
80mm Long x 7mm Wide x 41mm Deep with 3 x 4.5mm ID
Outside hole centre to centre hole centre - 28mm
£25.00 - IGV, PICKERINGS 66mm Long Nylon Counterweight Guide Shoe to Suit 5mm Guide Rail Part Number: 52755Dimensions:66mm Long x 56mm Wide with 2 x 10mm Slots (Centres 34mm) x 63mm Deep (Bracket 30mm, Liner 33mm)£15.00
- IGV, PICKERINGS 66mm Long Nylon Counterweight Guide Shoe to Suit 6mm Guide Rail Part Number: 52756Dimensions:66mm Long x 56mm Wide with 2 x 10mm Slots (Centres 34mm) x 63mm Deep (Bracket 30mm, Liner 33mm)£15.00
- IGV, PICKERINGS 64mm Long Nylon Counterweight Guide Shoe to Suit 7mm Guide Rail Part Number: 52757Dimensions:66mm Long x 56mm Wide with 2 x 10mm Slots (Centres 34mm) x 63mm Deep (Bracket 30mm, Liner 33mm)£15.00
- MONITOR Door Shoe with Nylon Gib Part Number: 55002Dimensions:75mm Long x 10.5mm Wide x 35mm Deep with M10 Pin£19.00
-
-
- MONITOR Nylon Kicking Roller with M8 Eccentric Pin Part Number: 55026Dimensions:28mm OD x 8mm Wide with M8 Eccentric Pin
Total Length - 36mm£21.00 - MONITOR Spring to Suit Europa Door (74mm Hole Centres) Part Number: 55034Dimensions:
86mm Long (74mm Hole Centres) x 9mm OD
£55.00 - CEAM Roller Door Shoe Part Number: 55601Dimensions:
40mm High x 19.5mm Wide
Plate - 28.5mm x 28.5mm£9.50 - OMRON Limit Roller with Aluminium Arm Part Number: 55901Dimensions:48.5mm OD x 13.5mm Wide
Roller with 76mm Long x 12.5mm Deep x 19mm Wide Arm£45.00 - DOPPLER Pick Up Assembly (DLD-DH-2T-3F) Bracket & Roller Part Number: 59932Dimensions:
Bracket: 76mm Long x 40mm Wide
Roller: 30mm OD x 14mm Wide£15.00 -
- DOPPLER Hexagon Door Shoe for Aluminium Sill - EN81.20-40 Part Number: 59974Dimensions:40mm Long x 12mm Wide x 52mm Deep£9.00
- DOPPLER Door Shoe with Nylon Gib Part Number: 59976Dimensions:40mm Long x 11mm Wide x 43mm Deep£7.50
- DOPPLER Nylon Door Guide Shoe Part Number: 59977Dimensions:62mm Long x 10mm Wide x 35mm Thick£11.00
-
- MISCELLANEOUS Stainless Steel Double Rope Grip Part Number: 61010Dimensions:36mm Long x 14mm Wide£2.00
- MISCELLANEOUS 3mm Zinc Plated Simplex Aircord Grip Part Number: 61011Dimensions:Head - 18mm Long x 15mm Wide with M4 - 15mm Long Thread£2.50
- MISCELLANEOUS 3mm Swageless Eye Aircord Terminal Part Number: 61014Dimensions:
62.5mm Long x 15mm Wide
£22.00 - MISCELLANEOUS Zinc Plated Aircord Loop Clamp (6mm) Part Number: 61015Dimensions:25mm Long x 16mm OD x 6.5mm ID with M6 fixings£6.00












































































































































































































































