Manufacturer
- Length/Height 101-120 Remove This Item
- Length/Height 81-100 Remove This Item
- Length/Height 61-80 Remove This Item
- ELECTRA VITORIA 70mm Long Guide Shoe to Suit 16mm Guide Rail Part Number: 39921Dimensions:70mm Long x 36mm Wide x 30mm Deep 16mm Slot Width£20.00
- CENTODUCATI 80mm Long Guide Shoe Part Number: 39945Dimensions:80mm Long x 38mm Wide x 22mm Deep
Hole Centres - 60mm£20.00 - ACE, CAPITAL Tape Head Shoe (Set of 2) Part Number: 39963Dimensions:96mm Long x 39mm Deep x 4mm Deep at narrowest point and 11.5mm Deep at widest point with 2 x 6mm Countersunk Holes
Hole Centres - 60mm apart£35.00 - SABIEM 92mm Long Nylon Guide Shoe Liner to Suit 6mm Guide Rail Part Number: 40466Dimensions:92mm Long (80mm Between Shoulders) x 28mm Wide (18mm Between Shoulders) x 39mm Deep (30mm Between Shoulders)£15.00
- SABIEM 92mm Long Nylon Guide Shoe Liner to Suit 7mm Guide Rail Part Number: 40467Dimensions:92mm Long (80mm Between Shoulders) x 28mm Wide (18mm Between Shoulders) x 39mm Deep (30mm Between Shoulders)£15.00
- SABIEM 92mm Long Nylon Guide Shoe Liner to Suit 8mm Guide Rail Part Number: 40468Dimensions:92mm Long (80mm Between Shoulders) x 28mm Wide (18mm Between Shoulders) x 39mm Deep (30mm Between Shoulders)£15.00
- SABIEM 105mm Long Nylon Guide Shoe Liner to Suit 6mm Guide Rail Part Number: 40469Dimensions:105mm Long (80mm Between Shoulders) x 30mm Wide (18mm Between Shoulders) x 45mm Deep (37mm Between Shoulders)£15.00
- SABIEM 69mm Long Nylon Guide Shoe Liner to Suit 6mm Guide Rail Part Number: 40472Dimensions:69mm Long x 20mm Wide x 31.5mm Deep£15.00
- SEMATIC Switch Support Bracket for 44040 Part Number: 44039Dimensions:88mm Long x 33mm Wide x 64mm Deep
Fixing Centres - 68mm£50.00 -
- SEMATIC Mild Steel Door Shoe with Nylon Gib Part Number: 44041Dimensions:80mm Long x 28mm Wide (7.5mm Wide Gib) x 38mm Deep with 64mm Hole Centres£12.00
- SEMATIC Landing Door Lock Release Assembly Part Number: 44048Dimensions:Plate - 83mm Long x 70mm Wide x 36mm Deep£80.00
- SEMATIC PZ18 Bridge Support for Landing Door (Right Hand) Part Number: 44080Dimensions:
90mm Long x 42mm Deep x 54mm Wide
£30.00 - SEMATIC PZ18 Bridge Support for Landing Door (Left Hand) Part Number: 44081Dimensions:
90mm Long x 42mm Deep x 54mm Wide
£30.00 - KRONENBERG Tension Switch (Left Hand) Part Number: 44205Dimensions:
93mm Long x 52.5mm Wide x 29.5mm Deep
£120.00 - KRONENBERG Reversing Bearing Block U-O Above Actuation Part Number: 44214Dimensions:80mm High x 110mm Wide x 78mm Deep£170.00
- KRONENBERG Reversing Bearing Block U-U Below Actuation Part Number: 44218Dimensions:
80mm High x 110mm Wide with 41.5mm OD Lock Roller
£170.00 - ELEX, KOMEPA Contact & Shunt Part Number: 44500Dimensions:
Contact - 72mm Long x 22mm High x 20mm Deep
Bridge - 40mm Long x 18mm High x 14mm Deep x 6mm Thick£18.00 - FUJITEC Bridge Contact Part Number: 44700Dimensions:80mm Long x 12mm Wide at top x 16.5mm Deep with 2 x 6mm Wide prongs 3.5mm apart£12.00
- FUJITEC Snap Together Nylon Door Shoe (Pair) Part Number: 44703Dimensions:60mm Long x 10.5mm Wide x 4mm Thick£10.00
-
- FUJITEC 120mm Long Nylon Guide Shoe Liner (Side) Part Number: 44708Dimensions:120mm Long x 25mm Wide x 6mm Thick£16.00
- FUJITEC 120mm Long Nylon Guide Shoe Liner (Back) Part Number: 44709Dimensions:120mm Long x 28mm Wide x 6mm Thick£16.00
- FUJITEC 100mm Long Polyethylene Guide Shoe to suit 10mm Guide Rail Part Number: 44710Dimensions:100mm Long x 27mm Wide x 32mm Deep£35.00
- FUJITEC Fire Rated Door Shoe Part Number: 44711Dimensions:67mm Long x 26mm Wide (12.5mm Wide Gib) x 43mm Deep with 30mm Hole Centres£9.50
- FUJITEC Aircord Roller & Assembly Bracket (Short) Part Number: 44714Dimensions:
Bracket: 80mm High x 110mm Wide x 35mm Deep with 2 x M8 Fixing Holes (80mm Hole Centres)
Roller: 68mm OD x 10mm Wide£80.00 - MITSUBISHI 120mm Long Polyethylene Guide Shoe Liner to Suit 16mm Guide Rail Part Number: 44800Dimensions:120mm Long x 28mm Wide x 41mm Maximum Height£45.00
- MITSUBISHI 120mm Long Polyethylene Guide Shoe Liner to Suit 10mm Guide Rail Part Number: 44802Dimensions:120mm Long x 28mm Wide x 41mm Deep£45.00
- MITSUBISHI Mild Steel Door Shoe with Nylon Gib Part Number: 44803Dimensions:64mm Long x 11.5mm Wide x 40mm Deep with 34mm Hole Centres£9.50
- MITSUBISHI Steel Rope Roller & Bracket Part Number: 44806Dimensions:
90mm OD x 97mm Long x 100mm Wide
£20.00 - MITSUBISHI Round Guide Rail Lubricator to Suit up to 24mm Guide Rails Part Number: 44809Dimensions:118mm OD x 118mm High
Fixing Hole Centres - 70mm£16.00 - MITSUBISHI Contact & Shunt Part Number: 44810Dimensions:
Contact - 63mm Long x 29mm Wide x 32mm Deep
Shunt - 67mm Long x 25mm Wide x 6mm Thick£15.00 - MITSUBISHI Door Retaining Spring (93mm Hole Centres) Part Number: 44813Dimensions:
120mm Long (93mm Between Hole Centres) x 15mm OD x 11mm ID
£16.00 - PRUDHOMME GV Lock Deadbolt Bush Part Number: 45005Dimensions:
69mm Long x 26mm Wide x 29.5mm Deep
£18.00 - PRUDHOMME Roller & Arm Part Number: 45010Dimensions:
Roller - 35mm OD x 15mm Wide with M8 x 56mm Shaft
Bracket - 104mm Long£50.00 - ASCEL, MONITOR Mild Steel Door Shoe with Polyurethane Gib Part Number: 49950Dimensions:
70mm Long x 20mm Wide (13mm Wide Gib) x 30mm Deep with 50mm Hole Centres
£30.00 - PICKERINGS, THYSSEN Door Shoe with Felt Liner - M3TK Part Number: 52746Dimensions:
80mm Long x 10mm Wide x 40mm Deep with 3 x M5 Fixings
£45.00 - PICKERINGS, THYSSEN Door Shoe with Vulkollan Liner - M3TK Part Number: 52747Dimensions:
80mm Long x 10mm Wide x 43mm Deep with 3 x M5 Fixings
£58.00 - PICKERINGS Aluminium Door Shoe with Nylon Gib Part Number: 52748Dimensions:
Gib - 77mm Long x 15mm Wide x 14mm High
Bracket - 93mm Long x 15mm Wide x 19mm Deep
Hole Centres - 37mm
£30.00 - PICKERINGS, THYSSEN Nylon Door Gib Part Number: 52750Dimensions:80mm Long x 9mm Wide x 41mm Deep with 28mm Hole Centres£18.00
- PICKERINGS, THYSSEN Aluminium Door Bracket Part Number: 52754Dimensions:
80mm Long x 7mm Wide x 41mm Deep with 3 x 4.5mm ID
Outside hole centre to centre hole centre - 28mm
£25.00 - IGV, PICKERINGS 66mm Long Nylon Counterweight Guide Shoe to Suit 5mm Guide Rail Part Number: 52755Dimensions:66mm Long x 56mm Wide with 2 x 10mm Slots (Centres 34mm) x 63mm Deep (Bracket 30mm, Liner 33mm)£15.00
- IGV, PICKERINGS 66mm Long Nylon Counterweight Guide Shoe to Suit 6mm Guide Rail Part Number: 52756Dimensions:66mm Long x 56mm Wide with 2 x 10mm Slots (Centres 34mm) x 63mm Deep (Bracket 30mm, Liner 33mm)£15.00
- IGV, PICKERINGS 64mm Long Nylon Counterweight Guide Shoe to Suit 7mm Guide Rail Part Number: 52757Dimensions:66mm Long x 56mm Wide with 2 x 10mm Slots (Centres 34mm) x 63mm Deep (Bracket 30mm, Liner 33mm)£15.00
- MONITOR Mild Steel Door Shoe with Nylon Gib Part Number: 55001Dimensions:86mm Long x 20mm Wide (9mm Wide Gib) x 41mm Deep with 40mm Hole Centres£23.00
- MONITOR Spring to Suit Europa Door (74mm Hole Centres) Part Number: 55034Dimensions:
86mm Long (74mm Hole Centres) x 9mm OD
£55.00 -
- OMRON Limit Roller with Steel Arm Part Number: 55900Dimensions:48.5mm OD x 13.5mm Wide
Roller with 102mm Long x 16mm Wide Arm£35.00 - OMRON Limit Roller with Aluminium Arm Part Number: 55901Dimensions:48.5mm OD x 13.5mm Wide
Roller with 76mm Long x 12.5mm Deep x 19mm Wide Arm£45.00 - PFB Overspeed Governor Switch Part Number: 58049Dimensions:
112mm Long x 84mm Wide x 37mm Deep with 72mm Hole Centres
£45.00



































































































































































































































































