Manufacturer
- Outside Diameter 31-40 Remove This Item
- Outside Diameter 11-20 Remove This Item
- Length/Height 121-140 Remove This Item
- Length/Height 21-40 Remove This Item
- KONE Opening Device for ADL1, ADL2, ADL3, ADL4 (Right Hand) Part Number: 10990Dimensions:
Plate - 135mm Long x 90mm Wide x 3mm Thick
Rollers - 32mm OD x 19.5mm Wide x 12mm ID£650.00 - KONE Lock Arm & Roller (Right Hand) Part Number: 11015Dimensions:Bracket: 124mm Long x 53mm Wide
Roller: 31.5mm OD x 16.5mm Wide
£18.00 - KONE Lock Arm & Roller (Left Hand) Part Number: 11016Dimensions:Bracket: 124mm Long x 53mm Wide
Roller: 31.5mm OD x 16.5mm Wide
£18.00 -
-
- GAL Car Gate Roller with M6 Threaded Insert Part Number: 13018Dimensions:32mm OD x 12.5mm Wide with M6 x 25mm Threaded Insert£8.50
- GAL Escutcheon to Suit GAL Drop Key Part Number: 13053Dimensions:36mm Long x with 19mm x 1.25mm lip x 13.5mm OD Body, reducing to 12.5mm at bottom x 10mm ID£10.00
- DUPAR / DEWHURST Landing Lock Arm Mounting Bracket Part Number: 17671Dimensions:127mm Long x 63.5mm Wide x 6mm Deep with 12.7mm OD Pin£20.00
- FERMATOR Closing Spring Safety Support Fixing Part Number: 18792Dimensions:35mm Long x 18mm OD£20.50
-
- FERMATOR Pick Up Roller Part Number: 18824Dimensions:
39mm OD x 12.7mm Wide with M10 x 33mm Threaded Stem
£28.00 -
- FERMATOR Pick Up Roller Part Number: 18984Dimensions:
40mm OD x 12.5mm Wide with M10 x 17.5mm Thread
£23.00 - FERMATOR Rubber Door Stop Part Number: 19075Dimensions:11mm OD x 5mm Bumper Depth x 24mm Long£9.50
- OTIS Door Shoe Bracket & Roller to Suit (Left Hand) Part Number: 20568Dimensions:
Bracket 50mm Wide x 32mm High x 28.5mm Thick
Roller 20mm OD x 12mm Wide
£48.50 - OTIS Door Shoe Bracket & Roller to Suit (Right Hand) Part Number: 20569Dimensions:
Bracket 50mm Wide x 32mm High x 28.5mm Thick
Roller 20mm OD x 12mm Wide
£48.50 -
- OTIS Steel Mounting Shaft for Isolation Mount Assembly Part Number: 21071Dimensions:
15mm OD x 30mm Long x 12mm ID
£7.00 - OTIS 130mm Guide Shoe Liner with One Peg Part Number: 21513Dimensions:
130mm Long x 21mm Wide x 6mm Deep with 16mm OD x 6mm Deep Peg
£9.00 - OTIS 130mm Guide Shoe Liner with One Peg Part Number: 21514Dimensions:
130mm Long x 30mm Wide x 6mm Deep with 16mm OD x 6mm Deep Peg
£9.00 -
- SELCOM M12 Eccentric Pin Part Number: 31957Dimensions:
Thread - M12 x 12mm Long
Shaft - M10 x 16.5mm Long
Total Length - 32.5mm£15.00 -
-
- SELCOM M12 Eccentric Pin Part Number: 32094Dimensions:
30.5mm Long x 12.7mm OD with M12 x 16mm Thread
£17.50 - ELLIS McDOUGALL Upthrust Roller with M10 Thread Part Number: 33103Dimensions:
32mm OD with M10 Thread x 33.5mm
£26.00 - CEITA Nylon Sleeve SN119 (Pack of 2) Part Number: 35018Dimensions:19mm OD (Max) x 15mm OD (Min) x 28mm Long x 12.5mm ID£9.00
- AUTUR Lock Bracket Roller Assembly Part Number: 36013Dimensions:
135mm Long x 17mm Wide x 45mm Deep witgh 2 x 36mm OD x 15mm Wide Rollers
£135.00 - SEMATIC Traction Spring for Skate without Locking Device (Red) Part Number: 44035Dimensions:
128mm Long (Between Loop Centres) x 10.5mm OD
£75.00 - MONITOR Lock Arm & Roller Part Number: 55015Dimensions:Arm - 126mm Long
Roller - 40mm OD x 13mm Wide
£20.00 -
- MONITOR Floor Reverse Switch (3 Positions) Part Number: 55051Dimensions:Box: 125mm Long x 76mm Wide x 30mm Deep
Roller: 34.5mm OD x 14mm Wide£100.00 - MISCELLANEOUS Zinc Plated Aircord Loop Clamp (6mm) Part Number: 61015Dimensions:25mm Long x 16mm OD x 6.5mm ID with M6 fixings£6.00
- MISCELLANEOUS Plain Stainless Steel 'T' Shaped Aircord End With Grub Screw Part Number: 61025Dimensions:
21mm Long x 12mm OD x 3mm ID
£6.00 - MISCELLANEOUS 8mm Aluminium Aircord End Cap Part Number: 61027Dimensions:
19mm OD x 8mm ID x 28mm Long
£2.00 - GMV Door Motor Pulley for Victory Door Part Number: 65005Dimensions:20mm OD x 23mm Long with Keyway Centre£30.00
- MEILLER Kicking Roller with M12 Concentric Pin Part Number: 66520Dimensions:
35mm OD x 13mm Wide Tyre with M12 Concentric Pin. Total Width 44mm
£95.00 - SCHINDLER M8 Concentric Type 'S' Threaded Pin (QKS11) Part Number: 77143Dimensions:16mm OD (max) x 27.5mm long with M8 x 9.5mm Thread£6.30
-
- BOLTON Holdfast Stand-Alone Magnet Part Number: 80312Dimensions:
33mm OD x 8mm Wide with M6 x 10mm Thread
£25.00 - MISCELLANEOUS Red Door Stop Part Number: 93965Dimensions:
18.5mm OD of Head x 11mm Wide
Head with M8 x 30mm Bolt£9.50 - MISCELLANEOUS Motor Encoder Coupling Part Number: 99250Dimensions:
18mm OD x 23mm Long x 6mm ID
£30.00 - HOLLISTER WHITNEY Aluminium Sleeve Part Number: 99980Dimensions:29mm Long x 17mm OD x 12.7mm (1/2") ID£12.50
- HOLLISTER WHITNEY Aluminium Sleeve Part Number: 99984Dimensions:
38mm Long x 17mm OD x 12.7mm (1/2") ID
£15.00 -














































































































































































































