Manufacturer
- Length/Height 201-400 Remove This Item
- Length/Height 161-180 Remove This Item
- Length/Height 101-120 Remove This Item
- Length/Height 21-40 Remove This Item
-
- KONE Skate NH=300 (Left Hand) Part Number: 11042Dimensions:
295mm Long x 352mm Wide x 62mm Deep
Short Arm - 295mm Long, Long Arm - 375mm Long
£595.00 - KONE Nylon Gib (AMD) Part Number: 11043Dimensions:30mm Long x 12.5mm Wide (When Assembled) x 14mm Deep£5.00
- KONE 120mm Long Nylon Guide Shoe Liner with Peg to Suit 16mm Guide Rail Part Number: 11045Dimensions:
120mm Long x 30mm Wide x 35mm Deep with 12mm OD Peg
£49.00 - KONE 120mm Long Nylon Guide Shoe Liner with Peg to Suit 8mm Guide Rail Part Number: 11049Dimensions:120mm Long x 30mm Wide x 35mm Deep with 12mm OD Peg£49.00
- KONE, MITSUBISHI 120mm Long Nylon Guide Shoe Liner to Suit 10mm Guide Rail Part Number: 11050Dimensions:120mm Long x 28mm Wide x 41mm Deep to Suit 10mm Guide Rail£15.00
- KONE, MITSUBISHI 120mm Long Nylon Guide Shoe Liner to Suit 16mm Guide Rail Part Number: 11051Dimensions:120mm Long x 28mm Wide x 41mm Deep to Suit 16mm Guide Rail£15.00
- KONE 210mm Polyethylene Guide Shoe to Suit 16mm Rail Part Number: 11052Dimensions:
210mm Long x 48mm Wide x 39mm Deep to suit 16mm Guide Rail
£95.00 - KONE Rubber Guide Shoe Outer (2 Pieces) Part Number: 11060Dimensions:118mm Long x 25mm Wide x 36mm Deep£12.00
- KONE Torsion Spring to Suit Unlocking Device Part Number: 11076Dimensions:
102mm Long x 9mm OD x 6mm ID
£19.00 -
- KONE 120mm Long Nylon Guide Shoe Liner to Suit 9mm Guide Rail Part Number: 11079Dimensions:
120mm Long x 28mm Wide x 40.5mm Deep
£42.00 - KONE 120mm Long Monospace Guide Shoe Holder complete with Liner to suit 16mm Guide Rail Part Number: 11082Dimensions:120mm Long x 104mm Wide x 38mm Deep with Liner to suit 16mm Rail.
Hole Centres - 80mm Lengthways and 80mm Widthways
£34.50 - KONE, MITSUBISHI 120mm Long Guide Shoe with Liner to Suit 16mm Guide Rail Part Number: 11083Dimensions:120mm Long x 104mm Wide x 65mm Deep with Liner to suit 16mm Rail.
Hole Centres - 80mm (Square)£45.00 - KONE Shunt for AMD Part Number: 11091Dimensions:40mm Long x 30mm Wide x 12mm Deep with 28mm Hole Centres£8.50
- KONE, SCHINDLER, SCHMERSAL, STEUTE Door Shunt for Sliding Door (AMD-2006) Part Number: 11100Dimensions:40mm Long x 40mm Wide£8.25
- KONE Nylon Door Gib (ADX-2) Part Number: 11141Dimensions:30mm Long x 12.5mm Wide x 12.5mm Deep£8.00
- KONE Stainless Steel Door Shoe with 2 Nylon Gibs (ADX2) Part Number: 11145Dimensions:386mm Long x 45mm Wide x 2.5mm Thick£28.50
- KONE 120mm Long Nylon Guide Shoe Liner with Peg to Suit 5mm Guide Rail Part Number: 11149Dimensions:120mm Long x 30mm Wide x 35mm Deep with a 12mm Diameter (Peg)£49.00
-
- KONE Steel Door Shoe with Nylon Gib Part Number: 11171Dimensions:30mm Long x 12mm x 56mm Deep£9.20
- KONE Skate Roller & Fixing with M5 Cap Bolt Part Number: 11181Dimensions:23mm OD x 25mm Long with M5 Cap Bolt£11.50
- KONE 210mm Long Phosphor Bronze Guide Shoe to Suit 16mm Guide Rail Part Number: 11182Dimensions:210mm Long x 48mm Wide x 39mm Deep£500.00
- MISCELLANEOUS 1mm Mild Steel Packer Part Number: 11194Dimensions:210mm Long x 48mm Wide x 1mm Thick£1.40
- KONE Monospace MRL Mainboard Cover (Clear Acrylic) Part Number: 11200Dimensions:227mm Long x 100mm Wide x 2mm Thick£24.00
- KONE Monospace Controller Guard (Clear Acrylic) Part Number: 11201Dimensions:400mm Long x 125mm Wide x 3mm Thick£25.00
- KONE Door Skate ADT 2 Panel (Left Hand) Part Number: 11208Dimensions:
290mm Long (Closed) x 345mm Long (Open) x 106mm Wide (Closed) x 128mm Wide (Open) x 43mm Deep
£190.00 - KONE Door Skate ADT 2 Panel (Right Hand) Part Number: 11209Dimensions:
290mm Long (Closed) x 345mm Long (Open) x 106mm Wide (Closed) x 128mm Wide (Open) x 43mm Deep
£190.00 - HAMMOND & CHAMPNESS M12 Eccentric Pin Part Number: 11230Dimensions:35mm Total Length x M12 x 10mm Long Thread£9.50
- HAMMOND & CHAMPNESS Drop Key Part Number: 11231Dimensions:
112mm Long x 43mm Wide x 5mm Deep
£30.00 - HAMMOND & CHAMPNESS Spoon Key Part Number: 11232Dimensions:
175mm Long x 9.5mm Wide x 5mm Deep
£18.00 - HAMMOND & CHAMPNESS Stainless Steel Door Shoe (Large Crank) Part Number: 11260Dimensions:
102mm Long x 25mm Wide (Gib 12.5mm Wide) x 40mm Deep with 90mm Hole Centres
£12.00 - HAMMOND & CHAMPNESS Nylon Door Gib Part Number: 11264Dimensions:102mm Long x 12.5mm Wide x 13mm Deep£5.00
- HAMMOND & CHAMPNESS Stainless Steel Door Shoe with Nylon Gib Part Number: 11265Dimensions:102mm Long x 15mm Wide (Gib 12.5mm) x 43mm Deep
Hole Centres - 90mm£8.90 - HAMMOND & CHAMPNESS Small Skate Vane (Closing) Part Number: 11291Dimensions:230mm Long x 29mm Wide x 26.5mm deep£24.90
- HAMMOND & CHAMPNESS Pick Up Roller Assembly (Left Hand) Part Number: 11294Dimensions:
178mm Long x 51mm Wide x 69mm Deep
£99.60 - HAMMOND & CHAMPNESS Pick Up Roller Assembly (Right Hand) Part Number: 11295Dimensions:
178mm Long x 51mm Wide x 69mm Deep
£99.60 - DOVER, HAMMOND & CHAMPNESS Interlock Beak Assembly with Fixings & 2 Piece Nylon Bush Set Part Number: 11299Dimensions:
168mm Long x 43mm Wide x 27mm Deep
£40.00 - DOVER, HAMMOND & CHAMPNESS Contact Part Number: 11301Dimensions:21mm Long x 9mm Wide x 9.5mm Deep£7.00
- DOVER, HAMMOND & CHAMPNESS Mounting Bolt Part Number: 11307Dimensions:
31mm Long with 3/8" (9.525mm) x 6.5mm Thread
£8.75 - HAMMOND & CHAMPNESS Ball Joint & Rod Link Kit (for Restrictor Clutch) Part Number: 11312Dimensions:235mm Long x 28mm Wide£25.00
- DOPPLER, HAMMOND & CHAMPNESS Door Bridge Part Number: 11325Dimensions:30mm Long x 22mm Wide x 6mm Thick£8.90
- HAMMOND & CHAMPNESS Kicking Roller with M10 Pin Part Number: 11330Dimensions:22mm OD x 31mm Long
Pin - M10 x 10mm Long£19.50 - ACLA Guide Rail Lubricator AK60 to Suit 5-16mm Guide Rail Part Number: 11467Dimensions:
116mm Long x 55mm Wide x 72mm Deep
£22.00 - ACLA Compact Guide Rail Lubricator to Suit 5-16mm Guide Rail Part Number: 11469Dimensions:113.5mm Wide x 168mm Long x 40mm Deep£17.00
- IGV Guide Lubricator Bracket Part Number: 11470Dimensions:
170mm High x 240mm Wide x 40mm Deep
Fixing Hole Centres - 195mm£7.00 - MISCELLANEOUS Flat Guide Rail Lubricator to Suit 16mm Guide Rail Part Number: 11477Dimensions:
110mm Long x 110mm Wide x 45mm Sloping Down to 41mm Deep
Fixing Holes Centres - 62mm£24.00 - ACLA Oil Collector Pot to Suit 5-6mm Guide Rail (Magnetic Fixings Available Separately) Part Number: 11480Dimensions:
111mm High x 115mm Wide tapering to 106mm Wide x 73mm Deep tapering to 61mm Deep
£11.00 - ACLA Oil Collector Pot to Suit 9-10mm Guide Rails (Magnetic Fixings Available Separately) Part Number: 11481Dimensions:
111mm High x 116mm Wide tapering to 106mm Wide x 75mm Deep tapering to 61mm Deep
£11.00 - ACLA Oil Collector Pot to Suit 16mm Guide Rail (Magnetic Fixings Available Separately) Part Number: 11482Dimensions:
111mm High x 116mm Wide tapering to 106mm Wide x 75mm Deep tapering to 61mm Deep
£11.00










































































































































































































































