Manufacturer
- Length/Height 401-600 Remove This Item
- Length/Height 121-140 Remove This Item
- Length/Height 21-40 Remove This Item
-
-
- GAL U-Bolt Kit, for 3/8" MOD Drive (2 Pieces) Part Number: 13033Dimensions:27mm Long x 21mm Wide£15.00
- GAL Locking Assembly with Rod & Standard Cam (Left Hand) Part Number: 13044Dimensions:Rod - 900mm Long
Plate - 127mm Long x 89mm Wide x 2mm Thick£85.00 - GAL Locking Assembly with Rod & Standard Cam (Right Hand) Part Number: 13045Dimensions:Rod - 900mm Long
Plate - 127mm Long x 89mm Wide x 2mm Thick£85.00 - GAL Escutcheon to Suit GAL Drop Key Part Number: 13053Dimensions:36mm Long x with 19mm x 1.25mm lip x 13.5mm OD Body, reducing to 12.5mm at bottom x 10mm ID£10.00
-
-
-
- GAL GAL Car Gate Lock with Bracket Part Number: 13114Dimensions:
128mm Long x 57mm Wide x 32mm Deep
Mounting Plate: 96mm Wide x 70mm Deep
£160.00 - GAL Link Arm for Operator (17 1/4" Long) Part Number: 13121Dimensions:
438mm (17 1/4") Long x 38mm (1 1/2") Wide x 6.35mm (1/4") Thick
£75.00 - THAMES VALLEY Tape Head Part Number: 13393Dimensions:
25mm High x 58mm Wide x 8mm Deep with 6 x 3.5mm ID Fixing Holes
Hole Centres - 44mm£13.00 - THAMES VALLEY Tape Head Cover Part Number: 13394Dimensions:26mm High x 57mm Wide x 3mm Deep with 2 x 3.5mm ID Fixing Holes
Hole Centres - 44mm£7.50 -
- EXPRESS Door Vane Assembly with Aluminium Skate Part Number: 16160Dimensions:
600mm Long x 95mm Wide x 141mm Deep
£850.00 - EXPRESS Nylon Shoe For Cycloidal Drive Block Part Number: 16164Dimensions:32mm Long x 30mm Wide x 30mm Deep£17.50
-
- EXPRESS 140mm Guide Shoe Part Number: 16167Dimensions:140mm Long x 140mm Wide
Slot: 29.5mm
Fixing Holes: 18mm Diameter
Hole Centres: 90mm
£35.00 -
- EXPRESS Short Bridge Contact Part Number: 16175Dimensions:30mm Long x 26mm Wide x 10mm Deep£40.00
- EXPRESS Short Stroke Push Contact (Pack of 5) Part Number: 16176Dimensions:32mm Long x 6.5mm Wide x 2mm Thick£80.00
- EXPRESS Cast Guide Shoe to Suit 16mm Guide Rail Part Number: 16185Dimensions:
125mm Long x 138mm Wide x 35.5mm Deep
£320.00 - DUPAR / DEWHURST Lock Arm & Roller Part Number: 17667Dimensions:
127mm Long (146mm Including Roller) x 19mm Wide x 13mm Deep with 50mm OD Roller
£34.00 - DUPAR / DEWHURST Landing Lock Arm Mounting Bracket Part Number: 17671Dimensions:127mm Long x 63.5mm Wide x 6mm Deep with 12.7mm OD Pin£20.00
- DUPAR / DEWHURST VL11 Beak & Carrier Part Number: 17673Dimensions:
139mm Long x 53mm Wide x 100mm Deep
£160.00 - DUPAR / DEWHURST VL Lock Release Flag (Left Hand) Part Number: 17674Dimensions:
140mm Long x 60mm Wide x 10mm Deep
£25.00 - DUPAR / DEWHURST VL Lock Release Flag (Right Hand) Part Number: 17675Dimensions:
140mm Long x 60mm Wide x 10mm Deep
£25.00 - DUPAR / DEWHURST VL31 Gate Lock (Left Hand) Part Number: 17676Dimensions:
138mm Long x 63mm Wide x 44mm Deep
£650.00 - DUPAR / DEWHURST VL31 Gate Lock (Right Hand) Part Number: 17677Dimensions:
138mm Long x 63mm Wide x 44mm Deep
£550.00 - DUPAR / DEWHURST VL11 Lock (Left Hand) Part Number: 17678Dimensions:
138mm Long x 63mm Wide x 44mm Deep
£350.00 - DUPAR / DEWHURST VL11 Lock (Right Hand) Part Number: 17679Dimensions:
138mm Long x 63mm Wide x 44mm Deep
£310.00 - DUPAR / DEWHURST FL16 Lock & Beak (Left Hand) Part Number: 17680Dimensions:Lock - 140mm Long x 89mm Wide x 39mm Deep
Beak - 175mm Long x 180mm Wide x 25mm Deep£1,200.00 - DUPAR / DEWHURST FL16 Lock & Beak (Right Hand) Part Number: 17681Dimensions:Lock - 140mm Long x 89mm Wide x 39mm Deep
Beak - 180mm Long x 79.5mm Wide£1,200.00 - DUPAR / DEWHURST VC40 Limit Switch Part Number: 17688Dimensions:
128mm Long x 43mm Wide x 54mm Deep with 9.5mm OD x 117.5mm Shaft
Arm: 127mm Long x 18.5mm Wide x 13.5mm Deep with 50mm OD Roller£145.00 - DUPAR / DEWHURST Clear Gate Lock Cover to Suit VL11 Lock Part Number: 17691Dimensions:134mm Long x 58mm Wide x 3mm Thick£9.50
-
- DUPAR / DEWHURST M10 Concentric Pin in Stainless Steel Part Number: 17708Dimensions:39mm Long x M10 Thread£14.00
- DUPAR / DEWHURST M8 Threaded Pin, Nuts & Washers Part Number: 17710Dimensions:30mm Thread x M8£13.00
- DUPAR / DEWHURST Nylon Lock Arm Knuckle Part Number: 17711Dimensions:
35mm Long x 27.5mm Wide x 16mm Thick
£30.00 -
- ALJO Door Shoe - T & Q Matic with Gib (New Type Series 0135) Part Number: 18193Dimensions:Overall Height - 47mm including Gib
Gib - 38mm Long x 10mm Wide£25.00 -
- ALJO Landing Release Roller with M8 Thread Part Number: 18205Dimensions:28mm OD x 20mm Wide with M8 x 32mm Long Stem£30.00
- FERMATOR Closing Spring (427mm Loop Centres) Part Number: 18789Dimensions:442mm Long (427mm Loop Centres) x 15mm OD£20.00
- FERMATOR Closing Spring (458mm Loop Centres) Part Number: 18790Dimensions:474mm Long (458mm Loop Centres) x 16mm OD£20.00
- FERMATOR Closing Spring (547.5mm Loop Centres) Part Number: 18791Dimensions:560mm Long (547.5mm Loop Centres) x 16mm OD£20.00
- FERMATOR Closing Spring Safety Support Fixing Part Number: 18792Dimensions:35mm Long x 18mm OD£20.50
-
- FERMATOR Lock Box (Right Hand) Part Number: 18818Dimensions:
122mm Long x 79mm Wide x 85mm Deep
£395.00 - FERMATOR Lock Box (Left Hand) Part Number: 18819Dimensions:140mm Long x 130mm Wide x 75.5mm Deep£110.00












































































































































































































































