Manufacturer
- Inside Diameter M10 Remove This Item
- Inside Diameter 0-10 Remove This Item
-
-
- EVANS Skate Roller with Brass Centre Part Number: 12566Dimensions:50mm OD x 19mm Wide x 9.5mm ID£16.00
-
-
- GAL Steel Upthrust Roller Part Number: 12968Dimensions:28.5mm OD x 9.5mm Wide with 3/8" x 14mm Thread£10.50
- GAL Activating Cam Roller Part Number: 12972Dimensions:
21mm OD x 10mm Wide with 3mm Shoulder (13mm Total Width) x 8mm ID
£7.50 - GAL Nylon Aircord Roller (70mm OD) Part Number: 12992Dimensions:70mm OD x 11mm Wide x 9.5mm ID (Centre Hole)£9.70
- GAL Nylon Sleeve for Door Closer Spring Part Number: 13019Dimensions:500mm x 10.5mm OD x 8mm ID£3.00
- GAL Escutcheon to Suit GAL Drop Key Part Number: 13053Dimensions:36mm Long x with 19mm x 1.25mm lip x 13.5mm OD Body, reducing to 12.5mm at bottom x 10mm ID£10.00
- THAMES VALLEY Tape Head Part Number: 13393Dimensions:
25mm High x 58mm Wide x 8mm Deep with 6 x 3.5mm ID Fixing Holes
Hole Centres - 44mm£13.00 - THAMES VALLEY Tape Head Cover Part Number: 13394Dimensions:26mm High x 57mm Wide x 3mm Deep with 2 x 3.5mm ID Fixing Holes
Hole Centres - 44mm£7.50 - EXPRESS Limit Roller with Rubber Tyre Part Number: 16108Dimensions:
69mm OD x 20mm Wide x 9.5mm ID
£45.00 - EXPRESS Axle Pin for Limit Roller Part Number: 16109Dimensions:49mm Long x 9.5mm OD with 2 x 2.5mm Holes£12.50
-
- EXPRESS Landing Door Closer Roller Part Number: 16163Dimensions:39mm OD x 16mm Wide x 10mm ID£12.00
-
-
-
-
- DUPAR / DEWHURST Clear Gate Lock Cover to Suit VL10 Part Number: 17690Dimensions:
165mm Long x 79mm Wide x 5mm Thick
£28.00 - DUPAR / DEWHURST Clear Gate Lock Cover to Suit VL11 Lock Part Number: 17691Dimensions:134mm Long x 58mm Wide x 3mm Thick£9.50
- DUPAR / DEWHURST Nylon Pick Up Roller Part Number: 17697Dimensions:32mm OD x 16mm Wide x 7.5mm ID£12.00
- DUPAR / DEWHURST Nylon Pick Up Roller Part Number: 17707Dimensions:38mm OD x 18mm Wide x 8mm ID£6.50
- DUPAR / DEWHURST M10 Concentric Pin in Stainless Steel Part Number: 17708Dimensions:39mm Long x M10 Thread£14.00
- DUPAR / DEWHURST Lockswitch Roller Part Number: 17709Dimensions:52mm OD x 18mm Wide x 8mm ID£11.00
-
- ALJO Round Clear Cover Part Number: 18207Dimensions:80mm OD x 2mm Thick with 2 x 4mm Fixing Holes£11.00
- FERMATOR Horizontal Sliding Drive Wheel Part Number: 18712Dimensions:
40mm OD x 16.75mm with M10 x 21mm Pin
£20.00 - FERMATOR Pick Up Roller Part Number: 18824Dimensions:
39mm OD x 12.7mm Wide with M10 x 33mm Threaded Stem
£28.00 - FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 18830Dimensions:
26mm OD with M10 x 12mm Threaded Stud Total Length - 29mm
£21.00 - FERMATOR, ORONA Aircord Tension Spring Part Number: 18836Dimensions:25mm Long x 9.50mm OD x 6mm ID£12.50
-
- FERMATOR, ORONA Door Closer Spring (395mm Long) to Suit 700mm Opening Part Number: 18922Dimensions:395mm Long (380mm Between Loop Centres) x 15mm OD£15.00
- FERMATOR Door Closer Spring (424mm Long) to Suit 800mm Opening Part Number: 18923Dimensions:
425mm Long (410mm Between Loop Centres) x 15mm OD
£15.00 -
-
- FERMATOR Nylon Aircord Roller (47mm OD) Part Number: 18941Dimensions:
47mm OD x 8mm Wide with 8mm Insert
£25.00 - FERMATOR Reinforced Kicking Roller Part Number: 18960Dimensions:
33mm OD x 15mm Wide with M10 x 15mm Long Eccentric Pin
£45.00 -
- FERMATOR Nylon Hanger Roller (Flat Track) with M10 Tapped Insert Part Number: 18969Dimensions:
56mm OD x 17mm Wide with M10 Tapped Insert
£45.00 - FERMATOR Pick Up Roller Part Number: 18984Dimensions:
40mm OD x 12.5mm Wide with M10 x 17.5mm Thread
£23.00 - FERMATOR Motor Pulley (Eagle Track) Part Number: 18995Dimensions:
24mm OD x 13mm Wide x 6.25mm ID
£28.00 - FERMATOR Motor Pulley Tapered (Post 2010) Part Number: 19018Dimensions:When assembled - 37mm OD x 22mm Wide x 6mm ID£44.00
-
- FERMATOR Nylon Lock Roller & Shaft Part Number: 19029Dimensions:
40mm OD x 12.5mm Wide with M10 x 40mm Long Thread
£17.50 -
- FERMATOR Door Closer Roller on Shaft Part Number: 19041Dimensions:Shaft - 41mm Long x 9mm OD (Smallest) x 12.5mm OD (Largest) Roller - 30mm OD x 12mm Wide x 9mm ID£16.00
- FERMATOR VVVF Motor Pulley (2 Part Set) (Pre 2010) Part Number: 19058Dimensions:Part 1 - 37mm OD x 20.5mm Wide x 8mm ID Part 2 - 37mm OD x 6mm Wide x 6mm ID£22.00
- FERMATOR 20mm OD Motor Pulley (Suits Folding Doors) Part Number: 19084Dimensions:20mm OD x 11mm Wide x 10mm ID£28.00
























































































































































































































