Manufacturer
- Inside Diameter M10 Remove This Item
- Inside Diameter M8 Remove This Item
- Inside Diameter 16-20 Remove This Item
- Inside Diameter 21-25 Remove This Item
- GAL Nylon Door Hanger Roller (Curved Track) Part Number: 13060Dimensions:
86mm OD x 17mm Wide x 17mm ID
£20.00 - GAL Steel Door Hanger Roller with Polyurethane Tyre & Wiper (Curved Track) Part Number: 13061Dimensions:
86mm OD x 18.5mm Wide x 17mm ID
£30.00 - GAL Steel Door Hanger Roller with Polyurethane Tyre, Wiper & Washers (Curved Track) Part Number: 13062Dimensions:
86mm OD x 18.5mm Wide x 17mm ID
£31.00 - GAL Fire Rated Steel Roller with Nylon Tyre (Curved Track) Part Number: 13077Dimensions:
85mm OD x 18.5mm Wide x 17mm ID
£50.00 - EXPRESS Nylon Car Door Hanger Roller with Eccentric Pin (Flat Track) Part Number: 16106Dimensions:
83mm OD x 22mm Wide x 12.7mm (1/2") Eccentric Pin
£28.00 - EXPRESS Pick Up Roller with M8 Concentric Stem Part Number: 16168Dimensions:Roller- 36mm OD x 19mm Wide
Pin- M8 x 60mm Long
£18.00 - EXPRESS Pick Up Roller with M8 Eccentric Stem Part Number: 16169Dimensions:Roller- 36mm OD x 19mm Wide
Pin - M8 x 60mm Long£18.50 -
- DUPAR / DEWHURST M8 Eccentric Pin Part Number: 17706Dimensions:
55mm Long x 8mm OD with M8 x 12mm Thread
£15.00 - DUPAR / DEWHURST M10 Concentric Pin in Stainless Steel Part Number: 17708Dimensions:39mm Long x M10 Thread£14.00
- DUPAR / DEWHURST M8 Threaded Pin, Nuts & Washers Part Number: 17710Dimensions:30mm Thread x M8£13.00
- ALJO Unlocking Roller for 104 Lock with M8 Thread Part Number: 18195Dimensions:73mm Long x 34mm OD x 15.5mm Wide x M8 Thread£12.50
- ALJO Door Gear Drive Wheel (70 Teeth) Part Number: 18198Dimensions:
110mm OD x 18mm Wide x 25mm ID
£95.00 - ALJO Landing Release Roller with M8 Thread Part Number: 18205Dimensions:28mm OD x 20mm Wide with M8 x 32mm Long Stem£30.00
- ALJO Door Gear Drive Wheel (50 Teeth) Part Number: 18209Dimensions:102mm OD x 18mm Wide x 25mm ID£95.00
- FERMATOR Horizontal Sliding Drive Wheel Part Number: 18712Dimensions:
40mm OD x 16.75mm with M10 x 21mm Pin
£20.00 -
- FERMATOR Pick Up Roller Part Number: 18824Dimensions:
39mm OD x 12.7mm Wide with M10 x 33mm Threaded Stem
£28.00 - FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 18830Dimensions:
26mm OD with M10 x 12mm Threaded Stud Total Length - 29mm
£21.00 - FERMATOR Steel Hanger Roller with Polyurethane Tyre (Curved Track) Part Number: 18831Dimensions:92mm OD x 19mm Wide x 17mm ID£68.00
-
- FERMATOR Ball Joint for Retractable Cam Part Number: 18851Dimensions:
35mm Long x 20mm Wide with M8 x 24mm Long Thread
£40.00 -
- FERMATOR Reinforced Kicking Roller Part Number: 18960Dimensions:
33mm OD x 15mm Wide with M10 x 15mm Long Eccentric Pin
£45.00 - FERMATOR Nylon Hanger Roller (Flat Track) with M10 Tapped Insert Part Number: 18969Dimensions:
56mm OD x 17mm Wide with M10 Tapped Insert
£45.00 - FERMATOR Pick Up Roller Part Number: 18984Dimensions:
40mm OD x 12.5mm Wide with M10 x 17.5mm Thread
£23.00 -
- FERMATOR Nylon Lock Roller & Shaft Part Number: 19029Dimensions:
40mm OD x 12.5mm Wide with M10 x 40mm Long Thread
£17.50 -
- FERMATOR Limit Switch Cam Part Number: 19036Dimensions:
32mm High x 23mm Wide x 12mm Deep x 16mm ID
£19.50 - FERMATOR Nylon Toothed Reduction Pulley (with Keyway & Key) Part Number: 19050Dimensions:86mm OD x 16mm ID£37.00
- FERMATOR Nylon Toothed Reduction Pulley (No Keyway) Part Number: 19051Dimensions:86mm OD x 16mm ID£35.00
- FERMATOR Trapezial Reduction Pulley (No Teeth) Part Number: 19052Dimensions:86mm OD x 16mm ID£35.00
- FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 19092Dimensions:30mm OD x 14mm Wide with M10 Eccentric Pin£16.00
- FERMATOR Nylon Kicking Roller with M10 Eccentric Pin Part Number: 19107Dimensions:31mm OD x 14mm Wide with M10 Eccentric Pin£28.00
- FERMATOR Kicking Roller with M10 Eccentric Pin Part Number: 19112Dimensions:
33mm OD x 14.75mm Wide with M10 Eccentric Pin
£14.00 - THYSSEN Nylon Double Aircord Roller (2 Grooves) Part Number: 19116Dimensions:
84mm OD x 18mm Wide x 20mm ID
£25.00 - THYSSEN Nylon Upthrust Roller with M8 Tapped Insert - M2TS6 / M2TD6 (Flat Track) Part Number: 19129Dimensions:
41mm OD x 13.5mm Wide with M8 Tapped Insert
£23.00 - THYSSEN Nylon Hanger Roller with M8 Insert (Curved Track) Part Number: 19131Dimensions:
68mm OD x 14mm Wide with M8 Insert
£28.00 - THYSSEN Car Door Locking Latch Roller & Shaft with M8 Thread Part Number: 19152Dimensions:
Roller - 26mm OD x 13mm Wide
M8 x 12.7mm Thread£24.00 - THYSSEN Steel Aircord Roller with M8 Concentric Pin Part Number: 19162Dimensions:60mm OD x 10mm Wide with M8 Concentric Pin£30.00
-
- THYSSEN M10 Bolt, Spacer, Washer & Nut Part Number: 19223Dimensions:
31mm Long with M10 Thread
£6.00 - THYSSEN Hanger Roller (48mm OD) with M8 Eccentric Pin (Curved Track) Part Number: 19225Dimensions:
48mm OD x 15.75mm Wide (12.7mm Track) with M8 x 14mm Eccentric Pin
£38.00 - THYSSEN Upthrust Roller (Curved Track) Part Number: 19230Dimensions:
41mm OD x 13.5mm Wide x M8 ID
£28.50 -
- OTIS Steel Washer Part Number: 20167Dimensions:
38mm OD x 1mm Thick with 1 x 16mm Hole and 1 x 3.5mm Hole
£8.50 -
- OTIS Steel Door Hanger Roller with Nylon Tyre (Curved Track) Part Number: 20212Dimensions:83mm OD x 17.5mm Wide x 20mm ID£46.00
- OTIS Protecta 3 Door Roller with M8 Eccentric Pin Part Number: 20214Dimensions:38mm OD x 14mm Wide with M8 Eccentric Pin£32.00





































































































































































































































