Manufacturer
- Length/Height 201-400 Remove This Item
- Length/Height 21-40 Remove This Item
- Depth/Thickness 61-70 Remove This Item
- Depth/Thickness 21-30 Remove This Item
- KONE Skate NH=300 (Left Hand) Part Number: 11042Dimensions:
295mm Long x 352mm Wide x 62mm Deep
Short Arm - 295mm Long, Long Arm - 375mm Long
£595.00 - HAMMOND & CHAMPNESS Small Skate Vane (Closing) Part Number: 11291Dimensions:230mm Long x 29mm Wide x 26.5mm deep£24.90
- GAL Skate Clutch Arm 9" with Offset Part Number: 13029Dimensions:
310mm Long x 32mm Wide x 22mm Deep with 44mm Fixing Hole Centres (Tapped 5/16")
£56.00 - GAL Rear Clutch Assembly LWZ-2-HA Part Number: 13038Dimensions:
392mm Long x 25mm Wide x 24mm Deep
£100.00 - EXPRESS Nylon Shoe For Cycloidal Drive Block Part Number: 16164Dimensions:32mm Long x 30mm Wide x 30mm Deep£17.50
-
- FERMATOR Operator Bracket Support (Left Hand) Part Number: 18706Dimensions:
245mm High x 240mm Wide x 62mm deep
£45.00 - FERMATOR Operator Bracket Support (Right Hand) Part Number: 18707Dimensions:
245mm High x 240mm Wide x 62mm deep
£45.00 - FERMATOR Skate Model LB PM Symmetric C4 Part Number: 18913Dimensions:
256mm Long x 69mm Deep
Skates Arm 176.5mm Long x 83mm Wide (Open), 48mm (Closed)
£440.00 - FERMATOR Lock Beak & Lock Plate with Rollers (Right Hand) Part Number: 19062Dimensions:
245mm Height x 96.5mm Width x 66.5mm Depth
£250.00 - FERMATOR Lock Beak & Lock Plate with Rollers (Left Hand) Part Number: 19063Dimensions:
245mm Height x 96.5mm Width x 66.5mm Depth
£250.00 -
-
- THYSSEN Belt Fixing for VF08 Operator Part Number: 19213Dimensions:
25mm High x 45mm Wide x 21mm Deep (Combined)
£9.50 - Door Shoe Clip to Suit Rubber Gib 20100 Part Number: 20101Dimensions:
22mm Long x 9mm Wide x 28.5mm Deep
£3.50 - OTIS Door Shoe Bracket & Roller to Suit (Right Hand) Part Number: 20569Dimensions:
Bracket 50mm Wide x 32mm High x 28.5mm Thick
Roller 20mm OD x 12mm Wide
£48.50 - OTIS 226mm Long Guide Shoe & Liner to Suit 9mm Guide Rail Part Number: 20807Dimensions:226mm Long x 90mm Wide x 25mm Deep
Fixing Hole Centres - 2 x 70mm, 2 x 80mm£120.00 - OTIS 226mm Long Guide Shoe Holder & Liner to Suit 10mm Guide Rail Part Number: 20809Dimensions:226mm Long x 90mm Wide x 25mm Deep£120.00
- FURSE Nylon Door Gib Part Number: 22195Dimensions:
31.5mm Long x 17.5mm Wide x 22mm Deep x 7mm ID
£7.00 - HAUSHAHN Hexagon Door Shoe with Polyurethane Gib Part Number: 25001Dimensions:30mm Long x 10.5mm Wide x 29mm Deep£25.00
- MACPUARSA Reveco II Skate Bridge Support Assembly Part Number: 29962Dimensions:
212mm Long x 170mm Wide x 30.5mm Deep
£315.00 - SELCOM Solid Gib Part Number: 31900Dimensions:40mm Long x 24mm Deep x Width machined to customer's requirements£9.50
- SELCOM Nylon Butterfly Door Gib Part Number: 31904Dimensions:
40mm Long x 12mm Wide x 25mm Deep
£4.00 -
-
- SELCOM Arm Support Plate with Buffers Part Number: 31917Dimensions:285mm Long x 80mm Wide x 24mm Deep
Fixing Hole Centres - 130mm£19.00 - SELCOM Mechanical Skate (Left Hand) Part Number: 31933Dimensions:
296mm Long x 222mm Wide x 30mm Deep
£500.00 - SELCOM Mechanical Skate (Right Hand) Part Number: 31934Dimensions:
296mm Long x 222mm Wide x 30mm Deep
£500.00 -
-
- IGV 217mm Long Nylon Guide Shoe Liner to Suit 10mm Guide Rail Part Number: 33148Dimensions:217mm Long (204mm Between Shoulders) x 20mm Wide x 30mm Deep£18.00
- CEITA Door Closer Arm with Nylon Roller (AZ121) Part Number: 35001Dimensions:Arm - 349mm Long x 20mm Wide x 26.5mm Deep
Roller - 23.5mm OD x 14mm Wide£30.00 - CEITA Door Closer Arm with Nylon Roller (AZ128) Part Number: 35002Dimensions:Arm - 349mm Long x 20mm Wide x 26mm Deep
Roller - 24mm OD x 14.5mm Wide£30.00 - CMM Complete Euro 91 Lock (Left Hand) Part Number: 39955Dimensions:
201mm Long x 119mm Wide x 66.5mm Deep with 2 x 34mm OD x 14mm Wide Rollers
£230.00 - CMM Complete Euro 91 Lock (Right Hand) Part Number: 39956Dimensions:
201mm Long x 119mm Wide x 66.5mm Deep with 2 x 34mm OD x 14mm Wide Rollers
£230.00 - SEMATIC Landing Door Lock Release (Left Hand Panel) Part Number: 44087Dimensions:
37mm High x 46.5mm Wide x 28mm Deep
£85.00 - SEMATIC Landing Door Lock Release (Right Hand Panel) Part Number: 44088Dimensions:
37mm High x 46.5mm Wide x 28mm Deep
£110.00 - FUJITEC Landing Door Aircord Roller & Extended Assembly Bracket Part Number: 44713Dimensions:
254mm Long x 73mm Wide x 22.5mm Deep with 66.5mm OD Roller x 10mm Wide
£75.00 -
- MONITOR Lock Assembly Series 086 (Right Hand) Part Number: 55053Dimensions:
203mm Long x 177mm Wide x 42mm Deep
£345.00 - MONITOR Lock Type 085-OL (Left Hand) Part Number: 55054Dimensions:
273.5mm Long x 52mm Wide x 68mm Deep
£450.00 - MONITOR Lock Type 085-OL (Right Hand) Part Number: 55055Dimensions:
273.5mm Long x 52mm Wide x 68mm Deep
£450.00 - DOPPLER Main Bracket for Lock (Left Hand) Part Number: 59962Dimensions:307mm Long x 127mm Wide x 27.5mm Deep£120.00
- GMV Victory Door Coupler (Left Hand) Part Number: 65025Dimensions:
350mm Long Open (390mm Long Closed) x 260mm Wide Open (280mm Wide Closed) x 38mm Deep
£345.00 - MEILLER Lock Beak IP20 (Left Hand) Part Number: 66501Dimensions:215mm Long x 85mm Wide x 63mm Deep with 2 x Rollers 42.5mm OD x 18mm Wide£300.00
-
- SCHINDLER 30mm Long Polyethylene Liner with Pin Part Number: 76998Dimensions:30mm Long x 13mm Wide x 25mm Deep£22.00
- SCHINDLER 216mm Long Polyurethane Guide Shoe Liner to Suit 16mm Guide Rail Part Number: 77012Dimensions:216mm Long x 29mm Wide x 26mm Deep£42.00
- SCHINDLER 220mm Long Nylon Guide Shoe Liner to suit 16mm Guide Rail Part Number: 77018Dimensions:220mm Long (212mm Between Shoulders) x 30mm Wide (24mm Body) x 31mm Deep ( 27.5mm Body)£75.00
- SCHINDLER 220mm Long Nylon Guide Shoe Liner to Suit 10mm Guide Rail Part Number: 77023Dimensions:220mm Long (210mm Between Shoulders) x 30mm Wide (24mm Body) x 31mm Deep ( 27.5mm Body) to Suit 10mm Rail£75.00






























































































































































































































































































